Back to search

Cornell University

Insect Powered Micro Air Vehicles And Centimeter Scale High Energy Density Pneumatic Sources

Abstract

dc:description.abstract

The flight times of traditional Micro-Air-Vehicles (MAVs) are limited by low energy density of batteries at small scale. On the other hand insects outperform MAVs in terms of flight time due to the higher energy density of carbohydrates and fat. Some of the most successful flapping wing MAVs have continuous flight time of only about 15 minutes, while some insects can have continuous flight times as high as three hours. Motivated by this, we have worked towards realization of insect powered MAVs. This dissertation presents successful navigation of moths, using light-weight and low-power actuators, demonstrating insect powered MAVs (IPMAV) for the first time. These MAVs can fly for long periods of time, consuming only a small fraction (1%) of power compared to purely mechanical MAVs. Untethered flight control of Balloon enabled IPMAVs was achieved using force based techniques. Flight control distances of over 1km and flight times of 40 minutes were achieved. This dissertation also reports the first use of carbon-fiber composite Centimeter-Scale High Pressure-Vessel (CSHPV) applied to MEMS actuators. We present the design, fabrication and testing of MEMS compatible CSHPV and valves with pneumatic energy densities exceeding those of the traditional Lithium battery and electromechanical actuator combination. The pneumatic power sources can provide direct mechanical power to move mechanical elements, enabling pathway for highly efficient operation. The 1-2 cc pressure vessels with burst pressures as high as 3250 bar were achieved corresponding to an energy density of 20.5 Wh/Kg, comparable to 50 Wh/Kg of Lithium batteries with similar volumes. A novel microfluidic interface to the CSHPV was realized using glass capillaries that provide high fluidic resistance at high pressures. Electromagnetic coil valves were fabricated to control CO2 flow from 10-20 micron diameter glass capillaries that could actuate surface micromachined polysilicon micromotors.

Degree

thesis:*
Name thesis:degree_name
Ph. D., Electrical Engineering
Level thesis:degree_level
Doctor of Philosophy
Discipline thesis:degree_discipline
Electrical Engineering
Grantor
Cornell University
Year dc:date.issued
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pulla, Venkata Siva Prasad
Chair dc:contributor.chair
  • Lal, Amit
Committee members dc:contributor.committeemember
  • Wang, Zheng Jane
  • Bhave, Sunil A.

Subjects

dc:subject × 5

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Dc Identifier Bibid
7745431

Chain of custody

source
Harvested from
Cornell University
Base URL
ecommons.cornell.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Pulla, Venkata Siva Prasad. Insect Powered Micro Air Vehicles And Centimeter Scale High Energy Density Pneumatic Sources. Doctor of Philosophy thesis, Cornell University, 2012. https://hdl.handle.net/1813/29506