Back to search

Cornell University

Urban Wind: Impact Of Building Geometry On The Wind Energy Yield Potential Above Rooftops Of Buildings

Abstract

dc:description.abstract

In increasing the energy available in urban areas, wind energy devices can be placed closer to where they are needed, thus decreasing external electricity demand and transmission costs. This dissertation examines the potential energy yield in the built environment. The primary objective is to show how the potential wind energy at the building rooftop can be increased by modifying and designing the building's structure to accelerate the wind. A crucial element in integrating wind as a source of energy in urban settings is finding ways to maximize wind speed and minimize turbulence intensity. Numerical simulations show that if the building's façade is changed, the flow dynamics at the rooftop can also change significantly leading to an increase in wind speed above the rooftop. To investigate this, a sloped façade building model, an elliptical façade building model, and a modified elliptical (rose façade building) model are compared to a rectangular building model. Both experiments and Computational Fluid Dynamics (CFD) are performed. The numerical simulation code, Fluent, was used to simulate a sloped façade building model at four angles, 20o, 30o, 45o, and 60o for comparison to a rectangular building model. The angle which performed the best, that angle being 30o, was used to experimentally investigate the flow around the sloped façade building and an elliptical façade building with the same angle. CFD is further used to modify the elliptical façade. Parameter correlations are performed to determine an improved building design that increases the available wind energy above the roof compared to the rectangular building model, while catering for the horizontal constraints present in the built environment. To investigate the flow over these modified structures, experiments are performed in an open circuit tunnel where a boundary layer is physically modeled using roughness elements. Results from experimental comparisons of the modified façade structures compared to the rectangular building model show that the rose façade building model, which is designed to minimize the building footprint compared to the sloped and elliptical façade building models, is able to increase the velocity at varying roof locations by as much as 55%. This change in velocity increases the wind power density by over 150%. Thus, changing the building's geometry to influence both the wind and turbulence characteristics above the roof can result in more steady sites for wind harvesting devices leading to increased energy yield.

Degree

thesis:*
Name thesis:degree_name
Ph. D., Mechanical Engineering
Level thesis:degree_level
Doctor of Philosophy
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
Cornell University
Year dc:date.issued
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Grayson, Malika
Chair dc:contributor.chair
  • Warhaft,Zellman
Committee members dc:contributor.committeemember
  • Desjardins,Olivier
  • Cowen III,Edwin Alfred
  • Barthelmie,Rebecca Jane

Subjects

dc:subject × 2

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Dc Identifier Bibid
9597163

Chain of custody

source
Harvested from
Cornell University
Base URL
ecommons.cornell.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Grayson, Malika. Urban Wind: Impact Of Building Geometry On The Wind Energy Yield Potential Above Rooftops Of Buildings. Doctor of Philosophy thesis, Cornell University, 2016. https://hdl.handle.net/1813/44342