Back to search

Cornell University

Design and Analysis of Supply-Scaled Distributed Power Amplifiers

Abstract

dc:description.abstract

Three distributed power amplifier topologies are developed for use in radio frequency (RF) front-ends. For viable integration in software-defined radios (SDR), the RF front-end must support operation over a wide range of tunable frequencies and duplex modulation schemes. This remains an unsolved challenge for circuit designers, and is the objective for the designs presented in this thesis. Two fully-integrated distributed power amplifier designs are developed in a 130nm SOI process. An on-chip artificial transmission line forms a path for the output current of each of the six power amplifier (PA) stages to constructively add at the antenna port. The initial design utilized class-A PA stages. To optimize power consumption, the second design implemented a supply-scaled class-AB distributed amplifier. The simulated power added efficiency (PAE) is 18.7% for an output power of 24.4 dBm, when source degenerated. Simulated power dissipation is 1.29 W from a 7.0 V supply. The measured output-referred 1 dB compression point and third-order intercept points are 9 dBm and 16 dBm, respectively. A third distributed amplifier design used a bulk CMOS 180nm process. Compared to an SOI process, the CMOS substrate is relatively lossy. Consequently, the design and discussion focused on using the systematic gm/ID design methodology to investigate circuit design trade-offs and optimize performance.

Degree

thesis:*
Name thesis:degree_name
M.S., Electrical and Computer Engineering
Level thesis:degree_level
Master of Science
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor
Cornell University
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Enroth, Emory T.
Chair dc:contributor.chair
  • Apsel, Alyssa B.
Committee members dc:contributor.committeemember
  • Molnar, Alyosha Christopher
  • Studer, Christoph

Subjects

dc:subject × 5

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Dc Identifier Bibid
10757978
Dc Identifier Other
ProQuest Submission ID: 10420
ProQuest Publication ID: 10981523

Chain of custody

source
Harvested from
Cornell University
Base URL
ecommons.cornell.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Enroth, Emory T.. Design and Analysis of Supply-Scaled Distributed Power Amplifiers. Master of Science thesis, Cornell University, 2018. https://hdl.handle.net/1813/64838