Back to search

Metallurgical and Materials Transactions B

TRANSIENT BEHAVIOR OF THE PLANAR-FLOW MELT SPINNING PROCESS WITH CAPILLARY DYNAMICS

Abstract

dc:description.abstract

Planar-flow melt spinning (PFMS) is a single-stage rapid manufacturing technique for producing thin metal sheets or ribbons. During the processing molten metal flows through a nozzle onto a moving substrate where a puddle is formed. This study focuses on the time dependent behavior of the process and looks at the puddle dynamics during the cast. Understanding how the issues of heat transfer, fluid flow and contacting dynamics influence the quality of the cast ribbon are the primary focus of the study. The commercial acceptance of PFMS requires ribbons to be cast with good quality (e.g. uniform thickness). There are a large range scales that are relevant to the ribbon product. Thickness variations occur on the macro-scale over the length of the cast (50 m). There is a steady decrease in ribbon thickness over the length of the cast. There is also a periodic variation on the length scale of the wheel circumference (2-3 m). Steady mass, momentum and energy balances are used to understand these long length-scale thickness variations. There are also thickness variations that occur on smaller scales, cm to mm. A periodic thickness variation across the width of the ribbon is a common defect observed in our casting, referred to as the cross-wave defect. The molten metal puddle is subject to capillary vibrations. We find that these oscillations correspond to the cross-wave defect. Motivated by the physics of the cross-wave defect, a more generalized problem of the vibrations of coupled capillary surface is identified. The motions of the puddle are similar to the classical problem of the vibration modes of a `plucked' sphere. In considering the possible modes of vibration for a droplet confined between two plates, we find a novel vibration mode where the center-of-mass oscillates. This model is extended to account for a droplet confined within a tube, with two sections of the droplet extending from each end. Restricting to quasi-steady interface shapes, we find a translational vibration mode which can occur with lower frequency than the traditional Rayleigh modes. The vibration frequencies are compared to experimental values.

Degree

thesis:*
Grantor dc:publisher
Metallurgical and Materials Transactions B
Year dc:date.issued
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Theisen, Eric

Subjects

dc:subject × 2

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Dc Identifier Bibid
6476299
Dc Identifier Citation
Byrne et al, Capillary puddle vibrations linked to casting-defect formation in planar-flow melt spinning. Met. Trans. B. 36B, p. 445-456, 2006

Chain of custody

source
Harvested from
Cornell University
Base URL
ecommons.cornell.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Theisen, Eric. TRANSIENT BEHAVIOR OF THE PLANAR-FLOW MELT SPINNING PROCESS WITH CAPILLARY DYNAMICS. Metallurgical and Materials Transactions B, 2006. https://hdl.handle.net/1813/7540