Back to search

University of Denver

The Effect of Modular Dual Mobility Design on the Dislocation Resistance of a Primary Total Hip

Abstract

dc:description.abstract

Total hip arthroplasty (THA) is a widely successful procedure in which the diseased proximal femoral and acetabular bones are replaced with an artificial prosthesis. While THA is extremely successful, revision surgery due to dislocation is still a concern which affects the patient, surgeon, and health care system. Resistance to dislocation remains a primary design consideration when developing new total hip arthroplasty prosthesis. The present study uses finite element modeling, musculoskeletal modeling and capsular representation to perform an analysis of the dislocation resistance of multiple dual mobility prosthesis designs. Twelve design combinations were tested in a patient driven, posterior dislocation event, and their range of motion at impingement, range of motion at dislocation, peak resistive moment, and energy to dislocate were calculated. These values were input into a dislocation resistance index equation and compared to a neutral acetabular liner with a Ø40mm femoral head to distinguish between designs. Three design combinations were found to have a higher resistance to a posterior dislocation event. A Ø41.775mm polyethylene mobile bearing with 1mm of medialization, a Ø41.775mm polyethylene mobile bearing with no medialization, and a Ø40.4mm polyethylene mobile bearing with no medialization, all combined with a half-lipped metal liner. While consideration of other events as well as model validation with cadaveric experiments is needed, all three designs performed better than the baseline comparator device and show promise as clinical design possibilities that reduce the likelihood of posterior dislocation.

Degree

thesis:*
Name thesis:degree_name
M.S.
Level thesis:degree_level
Masters Thesis

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Keefer, Ryan C.
Contributors dc:contributor
  • Paul J. Rullkoetter

Subjects

dc:subject × 7

Rights

dc:rights
Statement dc:rights
  • <p>Copyright is held by the author. Permanently suppressed.</p>
  • Ryan C. Keefer
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.du.edu/etd/2189

Chain of custody

source
Harvested from
University of Denver
Base URL
digitalcommons.du.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Keefer, Ryan C.. The Effect of Modular Dual Mobility Design on the Dislocation Resistance of a Primary Total Hip. Masters Thesis thesis, https://digitalcommons.du.edu/etd/2189