Back to search

Eastern Michigan University

A feasibility study of a surface modification method for polyolefin plastics formed by injection molding

Abstract

dc:description.abstract

Polyolefin plastic (i.e. polypropylene, polyethylene, thermoplastic olefin i.e. TPO and blends) articles formed by injection molding have been found to have many useful applications. Many costly and/or hazardous methods are employed to increase the surface energy to a level that promotes the ability of a coating or adhesive to make intimate contact and thereby bond to the molded surface. The method described herein refers to a process that could eliminate the need for a post molding process such as solvent or waterborne adhesion promoting primers or expensive, hazardous surface treatment equipment by modifying the plastic surface during the injection molding process. The method described in this project was found to demonstrate the modification of a nonpolar, polyolefin, plastic surface to that of a chlorine rich plastic surface, during the injection molding process. This change in character of the plastic surface also resulted in improved adhesion of a waterborne paint system.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Open Access Thesis
Discipline thesis:degree_discipline
Engineering Technology

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Naughton, David Brian
Contributors dc:contributor
  • Dr. J. David Nordstrom
  • Dr. Erik Lokensgard

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.emich.edu/theses/69

Chain of custody

source
Harvested from
Eastern Michigan University
Base URL
commons.emich.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Naughton, David Brian. A feasibility study of a surface modification method for polyolefin plastics formed by injection molding. Open Access Thesis thesis, https://commons.emich.edu/theses/69