École de technologie supérieure
Design d’une prothèse de resurfaçage de hanche en matériau composite biomimétique : mise au point d’outils d’évaluation numérique
Abstract
dc:descriptionHip resurfacing arthroplasty (HRA) is proposed as an alternative to total hip arthroplasty for patients suffering from osteoarthritis or degenerative arthrosis. HRA consist in removing the articular surface of the femoral head and replacing it with a spherical metallic implant that has a thin straight stem used as an alignment aid during implantation. HRA cannot be offered to all patients due to surgical contraindications related to bone quality in the femoral head. To overcome some of those problems, it has been suggested in the literature to cement the alignment stem of the femoral component. However, this could generate stress shielding (understressed bone tends to resorb, thus destabilizing the implant and causing aseptic loosening) in the femoral head, which could compromise the implant long term stability. The use of a biomimetic composite material with bone-matching properties could be a means of using the stem to optimize load transfer to the femoral bone. This optimisation would aim at minimizing stress shielding in the femoral head for an implant with a fixed stem, benefiting from the same stability as cemented stem implants without the increased stress shielding. The current thesis objective was to evaluate this solution by developing a finite element model of a hip resurfacing femoral component with a stem made of biomimetic composite material, and to evaluate its potential in terms of stress shielding reduction and biomechanical performance. Numerical results from a first study showed reduction of stress shielding for the implant with a fixed biomimetic stem when compared with a cemented metallic stem, but the biomimetic stem was still stress shielded when compared with an unfixed metallic stem or healthy femur. A second study examined modeling methods for bone-cement and bone-implant load-bearing interfaces for different fixation scenarios. It showed that traditional methods (bonded /frictional contact elements) created under certain circumstances unrealistic results such as complete absence of micromotions at bone-stem interface. A new interface element was developed to address some of the limitations observed on traditional interface modeling methods. This new interface element aimed at simulating the progressive degradation of bone-cement interfaces and osseointegration of bone-implant interfaces. Numerical results obtained with the biomimetic implant using the new element showed a partial osseointegration pattern on the stem surface, with the presence of “spot-welds” (localised points of perfect osseointegration). The new implant with its biomimetic stem allows reduction of stress shielding when compared with current metallic implants. Recommendations following this thesis include optimisation of the geometrical shape of the biomimetic stem, in order to further improve load transfer to the femoral proximal bone.
Degree
thesis:*- Name thesis:degree_name
- Thèse de doctorat électronique
- Level thesis:degree_level
- phd
- Grantor dc:publisher
- École de technologie supérieure
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Caouette, Christiane
Subjects
dc:subject × 1Rights
- Language dc:language
- fr
Identifiers
dc:identifier.*- Identifier
- INSERT-YOUR-LIBRARY-ID-HERE1106