Back to search

École de technologie supérieure

Finite element modeling of the heat source during welding of 415 steel joints (13%CR-4% NI) with the robotic FCAW

Abstract

dc:description

Residual stress is one of the most known problems through welding process in industry, as it caused the durability of welded part to reduce. Finite element analysis can predict the thermal distribution induced by welding process along the part, thereby calculating the residual stress. Several approaches have been developed to simulate the temperature variation and the residual stresses during welding. Despite all the efforts carried out by scholars to predict the temperature field within the welding processes, the lack of accuracy still remains an issue in the neighbouring of the heataffected zone. This study was intended to precisely calculate the thermal field within and in the vicinity of the heat affected zone through multi-pass welding using finite element analysis. A developed thermal finite element code at IREQ (Institut de recherche d'Hydro-Québec) was employed to calculate the thermal field within the multi-pass welding process. The program was modified to consider thermal properties of martensitic stainless steel 415 as the base material in order to offer a more reliable simulation of the heat transfer. Then, the capability of the program to predict the temperature distribution was evaluated at given nodes in the plate during multi-pass welding through comparison with the experimentally collected data. Goldak’s moving heat source was applied in the program to consider the induced thermal energy to the part by the welding process into the simulation. Furthermore, the element birth and death method were employed to model the deposition of the filler metal. In order to link the experimental and the numerical results, 20 thermocouples were installed in the plate, and thereby the temperature variation was monitored during welding process. The map of micro hardness and microstructure of cross-sections were analyzed to compare with the predicted configuration of the heat-affected zone in the simulation. At last in this study, the micro-hardness of small specimens were compared upon experimentally reproduction of the analytically simulated thermal history on the specimen, to the microhardness of the node of the welded part model corresponding to this thermal history. The comparison of the calculated and the experimentally measured thermal profile through the thermocouples demonstrate that the model can fairly predict the temperature profile during the heating and the cooling processes for the multi-pass welding process. The calculated average error was less than 10°C within the three pass welding, which is negligible compared to welding temperature.

Degree

thesis:*
Name thesis:degree_name
Mémoire de maîtrise électronique
Level thesis:degree_level
masters
Grantor dc:publisher
École de technologie supérieure
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tireh Dast, Matin

Subjects

dc:subject × 1

Rights

Language dc:language
fr

Identifiers

dc:identifier.*
Identifier
INSERT-YOUR-LIBRARY-ID-HERE1547

Chain of custody

source
Harvested from
ETS (Quebec)
Base URL
espace.etsmtl.ca/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tireh Dast, Matin. Finite element modeling of the heat source during welding of 415 steel joints (13%CR-4% NI) with the robotic FCAW. masters thesis, École de technologie supérieure, 2015.