Back to search

École de technologie supérieure

Machinability of polypropylene biocomposites reinforced with natural fibers and biocarbon particles

Abstract

dc:description

Biocomposites are increasingly being developed and applied in many engineering fields. Parts made of biocomposites are mostly produced close to their final shape. However, the secondary machining operation is required to achieve dimensional accuracy and surface finish. The machinability of biocomposite is significantly affected by the processing method, the reinforcement, and the matrix used in the biocomposite. Therefore, it is necessary to understand the machining behavior of a particular biocomposite. It could thereby help to choose suitable cutting parameters to obtain the desired surface quality during machining. This study investigates the key factors that affect the machinability indicators during the dry drilling of new biocomposites. These biocomposites are made of the same matrix (PP/POE/MAPP) reinforced with different weight ratios of chopped miscanthus fibers and biocarbon particles: biocomposite M1 (30wt% biocarbon), biocomposite M2 (30wt % miscanthus), and hybrid biocomposite M3 (15wt% miscanthus, 15wt% biocarbon). A full factorial design was used for the experimental design to study machining behavior during the drilling of biocomposites. The effects of the drilling parameters on the machinability indicators of biocomposites are measured and analyzed. The results from this research work demonstrated that the cutting parameters and the tool diameters significantly affect the machining process performance indicators (thrust force, specific cutting energy for thrust force, surface roughness, and fine particle emission) for all biocomposites. The type (nature and shape) and the weight ratio of reinforcement used in biocomposite have a significant effect on the machinability indicators. The drilling parameters are not statistically significant for ultrafine particle emission. Surface roughness (Ra) and thrust force in the drilling of biocomposites were predicted using regression analysis and ANFIS-based models. The results showed that predictive models have high predicted accuracy.

Degree

thesis:*
Name thesis:degree_name
Thèse de doctorat électronique
Level thesis:degree_level
phd
Grantor dc:publisher
École de technologie supérieure
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tran, Dinh Son

Subjects

dc:subject × 1

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Identifier
INSERT-YOUR-LIBRARY-ID-HERE2656

Chain of custody

source
Harvested from
ETS (Quebec)
Base URL
espace.etsmtl.ca/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tran, Dinh Son. Machinability of polypropylene biocomposites reinforced with natural fibers and biocarbon particles. phd thesis, École de technologie supérieure, 2020.