Back to search

École de technologie supérieure

Pavement evaluation with a non-destructive method, the falling weight deflectometer

Abstract

dc:description

Accurate determination of the modulus of asphalt layers for rehabilitation purposes and design of asphalt coating is of particular importance in the structural condition of flexible pavements. Structural evaluation of in-service pavement involves the in-place determination of the elastic modulus of pavement layers by destructive or nondestructive testing. Nondestructive testing has many advantages, such as high speed and low cost compared to destructive testing. The falling weight deflectometer (FWD) test is the most widely accepted and used technique for nondestructive evaluation of pavements and has been conducted extensively in the last decades to evaluate structural conditions and to determine the modulus of pavement layers. One of the most important applications of FWD test results is the analysis and backcalculation of layers modulus. The modulus of elasticity of the materials used in the pavements is used for the analysis of the remaining life and the design of new pavements and overlays. This critical value is computed through the backcalculation method, which uses FWD raw data. Various methods have been developed and applied to perform backcalculation. In most programs, the FWD data are used as if they are the results of static loads, while the real loads have the dynamic behaviour. Therefore, the results can vary for flexible pavements. The objective of this study is to present the results and analysis of some FWD data, which have been obtained by some FWD tests carried out in the USA; in particular, to document the results, which were backcalculated by the DBSID program. These results can be compared to the results of the MODULUS program, which has been developed by the Texas Transportation Institute (TTI). Then, the effects of different parameters such as pavement temperature and the surface layer thicknesses on the FWD layer modulus are performed. A comparison between the FWD layer modulus obtained from both programs and the International Roughness Index (IRI) values of the same test sections is also done. This study will enable us to have more precise and reliable results with the FWD.

Degree

thesis:*
Name thesis:degree_name
Mémoire de maîtrise électronique
Level thesis:degree_level
masters
Grantor dc:publisher
École de technologie supérieure
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rezaeezadeh, Amin

Subjects

dc:subject × 1

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Identifier
INSERT-YOUR-LIBRARY-ID-HERE3043

Chain of custody

source
Harvested from
ETS (Quebec)
Base URL
espace.etsmtl.ca/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Rezaeezadeh, Amin. Pavement evaluation with a non-destructive method, the falling weight deflectometer. masters thesis, École de technologie supérieure, 2022.