Back to search

École de technologie supérieure

Analysis of strain heterogeneity in additive manufactured Ti6Al4V cubic porous structures by experimental testing and finite element method

Abstract

dc:description

The mechanical behavior, especially strain heterogeneity, of porous titanium biomaterials (Ti6Al-4V) was studied by using 2D digital image correlation technique (2D DIC). Three cubic samples with 75% porosity were fabricated using selective laser melting (SLM), which is based on laser powder bed fusion (LPBF) technique. They were tested under quasi-static compressive loading condition up to 1 mm displacement of machine crosshead. Along with 2D DIC method, contact extensometer was used to measure displacement more accurately. The apparent stressstrain graphs for three samples and three methods were obtained, and it was found that sample 2 has the lowest apparent elastic modulus while the longest linear region, which is in contrast for sample 1. The strain maps and histograms obtained by OpenDIC and ImageJ software demonstrated that strain distribution is not the same not only among three faces of each sample, but also in one specific face through three samples. This fact was analyzed by laser scanning confocal microscope for three faces of sample 3 (before and after test). Most importantly, advanced analysis of strain graphs for each floor encompassing only vertical struts helped to conclude that although each floor does not have the same strain behavior and peak strain value among three samples, floor 2 has the highest localized strain. Lastly, late deformation of one floor can be a potential sign of severe strain accumulation in few struts of that floor i.e. floor 2.

Degree

thesis:*
Name thesis:degree_name
Thèse de doctorat électronique
Level thesis:degree_level
phd
Grantor dc:publisher
École de technologie supérieure
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Paknezhad, Mehrdad

Subjects

dc:subject × 1

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Identifier
INSERT-YOUR-LIBRARY-ID-HERE3435

Chain of custody

source
Harvested from
ETS (Quebec)
Base URL
espace.etsmtl.ca/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Paknezhad, Mehrdad. Analysis of strain heterogeneity in additive manufactured Ti6Al4V cubic porous structures by experimental testing and finite element method. phd thesis, École de technologie supérieure, 2024.