Back to search

École de technologie supérieure

Effects of lignin on the properties and performance of bitumen and hot mix asphalt

Abstract

dc:description

This research program aims to investigate the effects of lignin addition, in powder and pellet form, on the properties of bitumen and performance of HMA. The incorporation process of different lignin contents into bitumen is investigated in order to select the parameters (temperature, speed and duration) of the incorporation process and to show the effect of each parameter on the stability and homogeneity of the modified bitumen. The incorporation process is evaluated by performing storage stability test and microscope observation. Afterwards, the rheological and chemical properties of lignin-modified bitumen are studied in detail by performing Brookfield rotational viscometer (BRV), dynamic shear rheometer (DSR), multiple stress creep recovery (MSCR), bending beam rheometer (BBR), full complex modulus (G*) and Fourier-transform infrared (FTIR) tests. The anti oxidative effect of the lignin on the aging properties of the lignin modified bitumen is also discussed. For HMA, shear gyratory compaction (SGC) tests are performed to examine the lignin effects on the compactability of modified HMA by using the wet and dry process. Following, the HMA performance is evaluated through a series of tests, including moisture sensitivity, indirect tensile strength (ITS), complex modulus (E*), rutting and thermal stress restrained specimen test (TSRST). The results show that the lignin is stable in bitumen and lignin is well dispersed and distributed over bitumen. The effect of incorporation temperature and duration on the stability and homogeneity of bitumen should be considered for high lignin content. Lignin powder increases the viscosity of the bitumen, stiffness at high and low temperatures and resistance to permanent deformation, while the pellets show different behaviour which is due to the presence of soybean oil that dilutes the bitumen. Lignin does not show anti oxidative aging properties of bitumen. For the HMA compactability, lignin increases the air voids content, while the tall oil decreases it. The wet process shows lower air voids than the dry process. Lignin improves the moisture sensitivity and rutting resistance of HMA. Lignin increases the stiffness of the bitumen and decreases the phase angle. Adding low lignin content does not show a significant change on the low temperature performance, while high lignin content reduces the resistance to thermal cracking. Overall, it is possible to replace part of the bitumen by lignin.

Degree

thesis:*
Name thesis:degree_name
Thèse de doctorat électronique
Level thesis:degree_level
phd
Grantor dc:publisher
École de technologie supérieure
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Al-Falahat, Wesam

Subjects

dc:subject × 1

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Identifier
INSERT-YOUR-LIBRARY-ID-HERE3508

Chain of custody

source
Harvested from
ETS (Quebec)
Base URL
espace.etsmtl.ca/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Al-Falahat, Wesam. Effects of lignin on the properties and performance of bitumen and hot mix asphalt. phd thesis, École de technologie supérieure, 2024.