Back to search

École de technologie supérieure

A generic fuel cell model and experimental validation

Abstract

dc:description

Fuel cells offer clean, quiet and efficient electrical energy. Environmental issues regarding the emissions of green house gases have propelled the use of fuel cells in applications such as automotive, mobile and power generation systems. These fuel cells generate unregulated DC voltage and are usually connected to a power system through DC-DC converters. The design and simulation of such converters or the whole power system require an accurate model of fuel cells. Many publications on fuel cell modeling have been reported in the previous years, but most of the proposed fuel cells models are obtained empirically or through experiments on actual fuel cells. These models are only valid for particular fuel cells and can not be generalized. This does not facilitate the simulation and the design of fuel cells power systems, especially when the user does not have the fuel cells at hands. In this project, a new approach of fuel cell modeling is proposed, an approach where the fuel cells model is obtained from data from fuel cells datasheets which are provided by stack manufacturers and publicly available. The model is a generic model and able to emulate the behavior of any fuel cell types fed with hydrogen and air. The model is validated through comparison with real datasheet performance and with experimental data from an actual fuel cell stack. The datasheet of a 6kW-45V proton exchange membrane fuel cell (PEMFC) from NedStack is considered for the study and experimental tests are performed on a 500W-48V PEMFC (EPAC-500). The simulations results obtained are close to the expected results with an error in the range of ±1 %, that for both steady and transient states and at any condition of operation, provided a controlled stack internal humidity. However, the model gives an error of 1% for every 9% increase in air pressure and an error of 3% for a 15% decrease in temperature due to the effect of humidity. This model is integrated in SimPowerSystems (SPS) and made available to SPS users. A fuel cell vehicle demonstration (FCV demo) is presented to point out the advantages of the proposed model in the simulation of fuel cell power systems and to show how the fuel cell model inter-connects with other electrical systems. The vehicle is modeled with the same characteristics as the Honda FCX-Clarity developed by Honda. The performances of the fuel cell model and the vehicle are close to their real values in terms of fuel consumption, maximum speed and acceleration. This confirms the validity of the FCV demo. The FCV demo is a typical application of fuel cells and can be used as a perfect starting point on the design and simulation of fuel cell power systems.

Degree

thesis:*
Name thesis:degree_name
Mémoire de maîtrise électronique
Level thesis:degree_level
masters
Grantor dc:publisher
École de technologie supérieure
Year dc:date
2008

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Njoya Motapon, Souleman

Subjects

dc:subject × 1

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Identifier
INSERT-YOUR-LIBRARY-ID-HERE620

Chain of custody

source
Harvested from
ETS (Quebec)
Base URL
espace.etsmtl.ca/cgi/oai2
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Njoya Motapon, Souleman. A generic fuel cell model and experimental validation. masters thesis, École de technologie supérieure, 2008.