Back to search

Georgia Institute of Technology

Construction Simulation of Curved Steel I-Girder Bridges

Abstract

dc:description.abstract

This study addresses the development of a prototype software system for analysis of horizontally curved steel I-girder bridges using open-section thin-walled beam theory. Recommendations are provided for the use of three-dimensional (3D) grid idealizations in analyzing curved I-girder bridge structural systems. The 3D grid idealizations account for the general displacements and rotations common within complex curved I-girder bridge structures, i.e., none of the displacement and rotational degrees-of-freedom are arbitrarily assumed to be equal to zero. Also, these idealizations account for the warping (or cross-bending) deformations of the I-girder flanges that dominate typical girder torsional responses. An approximate approach is investigated for capturing the influence of girder web distortion on composite I-girder responses. A key focus of this research is the development of prototype methods for simulating the construction of curved steel I-girder bridges, including erection of the steel and staged casting of the slab. The resulting capabilities allow engineers to evaluate the deflections, reactions and/or stresses at different stages of the steel erection or concrete slab construction, determine required crane capacities, tie-down, jacking or come-along forces, and calculate incremental displacements due to removal of temporary supports. Also, the capabilities can be used to determine the influence of different steel detailing methods on the bridge geometry, such as the web plumbness under the steel or total dead load. Key requirements necessary to ensure accuracy of the analysis results are addressed.

Degree

thesis:*
Department dc:contributor.department
Civil and Environmental Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chang, Ching-Jen
Advisor dc:contributor.advisor
  • White, Donald W.
Committee members dc:contributor.committeemember
  • Bauchau, Olivier
  • Haj-Ali, Rami
  • Leon, Roberto
  • Will, Kenneth

Subjects

dc:subject × 6

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/11592

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chang, Ching-Jen. Construction Simulation of Curved Steel I-Girder Bridges. Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/11592