Back to search

Georgia Institute of Technology

Low-Cost Continuous Production of Carbon Fiber-Reinforced Aluminum Composites

Abstract

dc:description.abstract

The research conducted in this study was concerned with the development of low-cost continuous production of carbon fiber/aluminum composites. Two coatings, alumina and zirconia, were applied to the fibers to protect against interfacial degradation. They were applied using a sol-gel method and common metal salts. The fibers were infiltrated with molten aluminum using an ultrasound sonicator. The resultant composites were well-infiltrated and were tested in tension to determine their mechanical properties. Strengths were only 15-35% of the theoretical values predicted by the rule of mixtures. The composite microstructure revealed a sizable void fraction and that the fibers within the composites did not contain any coating on their surface. It was hypothesized that this was a result of few exposed graphite plane edges on the fiber surface, causing poor adhesion of the oxide coating to the fiber surface. To improve adhesion, an amorphous carbon coating was applied to the fiber surface, but still the oxide coatings were removed from the fibers upon infiltration. It was found, however, that the carbon coating on its own did strengthen the interface between the fiber and the aluminum.

Degree

thesis:*
Department dc:contributor.department
Materials Science and Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2007

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Durkin, Craig Raymond
Advisor dc:contributor.advisor
  • Johnson, W. Steven
Committee members dc:contributor.committeemember
  • Carter, W. Brent
  • Cochran, Joe

Subjects

dc:subject × 12

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/19857

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Durkin, Craig Raymond. Low-Cost Continuous Production of Carbon Fiber-Reinforced Aluminum Composites. Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19857