Back to search

Georgia Institute of Technology

Signal to power coupling and noise induced jitter in differential signaling

Abstract

dc:description.abstract

Differential interconnects are extensively used in high-speed digital circuits at fast data rates and in environments of high noise like backplanes. For such applications they are preferred over single-ended lines owing to their ability to reject common-mode noise. Differential schemes like Low Voltage Differential Signaling (LVDS) are used for wireless base stations and ATM switches in telecommunication applications, flat panel displays and servers and for system-level clock distribution. LVDS applications use data rates from 100 Mbps to about 1.5 Gbps and are expected to be highly immune to noise. However, noise will also be injected into differential signals at these high data rates, if there are irregularities in the interconnect setup. These anomalies may be via transitions from differential lines through power planes in power distribution systems, via stubs, asymmetric lengths of differential lines, different transition points for each of the differential vias etc. The differential setup is expected to be immune to such imbalances; however, investigation of these discontinuities indicate that sufficient signal energy can be leaked to power distribution networks (PDN) of packages and boards. The effect of this energy loss was examined in time-domain and was found to cause signal integrity effects like jitter. Irregular differential structures were compared with the equivalent single-ended configuration and symmetrical perfect differential lines. This thesis work quantifies signal to power coupling caused by irregular differential structures in the presence of PDN planes in frequency domain. Presence of noise in differential signaling is verified through a set of test vehicles. The jitter induced as a result of signal to power coupling from differential lines was also investigated.

Degree

thesis:*
Department dc:contributor.department
Electrical and Computer Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2008

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chandrasekhar, Janani
Advisor dc:contributor.advisor
  • Madhavan, Swaminathan
Committee members dc:contributor.committeemember
  • Chatterjee, Abhijit
  • Davis Jeffrey

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/24778

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chandrasekhar, Janani. Signal to power coupling and noise induced jitter in differential signaling. Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24778