Abstract
dc:description.abstractThe goal of this research is to develop an integrated polymer embossing module, with which difficult-to-emboss polymer microstructures and microparts can be fabricated in a cost-effective manner. In particular, the research addresses three major limitations of the hot embossing process, namely, long cycle time, difficulty in producing shell patterns, and difficulty in building up a high embossing pressure on thick substrates. To overcome these limitations, three new technical approaches two-station embossing, rubber-assisted embossing, and through-thickness embossing were developed and investigated. Fundamental understanding of these new embossing techniques were achieved through extensive experimental and theoretical studies involving parametric experiments, rheological characterization, surface investigation, mathematical modeling, and computer simulation.
Degree
thesis:*- Department dc:contributor.department
- Polymer, Textile and Fiber Engineering
- Grantor dc:publisher
- Georgia Institute of Technology
- Year dc:date.issued
- 2008
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Nagarajan, Pratapkumar
- Advisor dc:contributor.advisor
-
- Yao, Donggang
- Committee members dc:contributor.committeemember
-
- John.Muzzy
- Jacob, Karl I.
- Carr, Wallace W.
- Wang, Youjiang
Subjects
dc:subject × 6Identifiers
dc:identifier.*- Handle dc:identifier.uri
- http://hdl.handle.net/1853/26539