Back to search

Georgia Institute of Technology

Design of process and environment adaptive ultra-low power wireless circuits and systems

Abstract

dc:description.abstract

The objective of the proposed research is to investigate the design of Self-Aware Radio Frequency Circuits and Wireless Communication Systems that can adapt to environmental and process variations to always operate at minimum power levels possible, extending battery life. The explosive growth of portable battery operated devices has mandated design of low power circuits and systems to prolong battery life. These devices fabricated in modern nanoscale CMOS technologies suffer from severe process variation due to the reduced controllability of the fabrication process, causing yield loss. This calls for integrated low power and process tolerant design techniques, or design of systems that can adapt to its process and environment to maintain its performance while minimizing power consumption. Currently, most of the wireless circuits are designed to meet minimum quality-of-service requirements under worst-case wireless link conditions (interference, noise, multi-path effects), leading to high power consumption when the channel is better than worst-case. In this research, we develop a multi-dimensional adaptation approach for wireless transmitters and receivers that optimally trades-off power vs. performance across temporally changing operating conditions by concurrently tuning control parameters in the RF front end to lower power consumption. Tunable circuits (e.g. LNA) with built-in tuning knobs providing independent controllability of important specifications allow optimal adaptation. Process sensing using intelligent test and calibration facilitates yield improvement and the design of process tolerant environment adaptive systems. Low cost testing methodologies are developed for identification of the health of the wireless circuit/system. These are used in conjunction with tuning algorithms that tune a wireless system under process variation to meet performance specifications and recover yield loss. This testing and adaptation is performed once during the post manufacture test/tune phase to compensate for manufacturing variations. This can also be applied periodically during in field operation of a device to account for performance degradation due to ageing. Finally, process tolerant environment adaptive systems are designed.

Degree

thesis:*
Department dc:contributor.department
Electrical and Computer Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sen, Shreyas
Advisor dc:contributor.advisor
  • Chatterjee, Abhijit
Committee members dc:contributor.committeemember
  • Bonnie Heck Ferri
  • David Keezer
  • Saibal Mukhopadhyay
  • Satish Kumar

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/45755

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sen, Shreyas. Design of process and environment adaptive ultra-low power wireless circuits and systems. Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/45755