Back to search

Georgia Institute of Technology

Evaluation of Frictional Characteristics of Precision Machined Surfaces

Abstract

dc:description.abstract

Precision surface finishes are used in a wide variety of applications. From bearing races and rolling elements to parallel slide ways, the frictional characteristics of these surfaces are critical to the performance of the products. Experimental trial and error has shown that certain surfaces outperform others in certain applications, but the specific surface characteristics that make this true have yet to be fully understood. The research goal was to develop an apparatus that can test the coefficient of rolling/sliding friction of different precision machined surfaces and to combine this data with topographic analysis of the surfaces to correlate specific 3-D parameters with the frictional performance of a surface. The sample treatments consisted of four different surface textures (hard-turned, ground, honed and isotropic finish) and four different relative surface speeds. By monitoring the torque in the sample-mounting shaft under lubricated conditions the coefficient of rolling/sliding friction of each surface was found. Utilizing white light interferometry measurement of the surfaces, a highly detailed map of each surface was obtained. Using different characteristic values of each machined surface (RMS roughness, asperity density, lay direction, etc.), the frictional behavior of the surfaces were compared to the surface characteristics yielding insight into the relationship between surface finish and friction in rolling/sliding contact. Friction coefficient was found to correlate most strongly with RMS roughness (Sq) and density of surface summits (Sds). These parameters govern mechanical interference of asperities and surface adhesion respectively. These findings suggest that friction coefficients of surfaces could be optimized through manipulation of three-dimensional surface parameters.

Degree

thesis:*
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kalil, Richard Charles, Jr.
Advisor dc:contributor.advisor
  • Melkote, Shreyes N.
Committee members dc:contributor.committeemember
  • Danyluk, Steven
  • Kurfess, Tom

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/5000

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kalil, Richard Charles, Jr.. Evaluation of Frictional Characteristics of Precision Machined Surfaces. Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5000