Back to search

Georgia Institute of Technology

Modeling, design, fabrication and characterization of glass package-to-PCB interconnections

Abstract

dc:description.abstract

Emerging I/O density and bandwidth requirements are driving packages to low-CTE silicon, glass and organic substrates for higher wiring density and reliability of interconnections and Cu-low k dielectrics. These are needed for high performance applications as 2.5D packages in large-size, and also as ultra-thin packages for consumer applications that are directly assembled on the board without the need for an intermediate package. The trend to low-CTE packages (CTE of 3-8ppm/°C), however, creates large CTE mismatch with the board on which they are assembled. Interconnection reliability is, therefore, a major concern when low CTE interposers are surface mounted onto organic system boards via solder joints. This reliability concern is further aggravated with large package sizes and finer pitch. For wide acceptance of low CTE packages in high volume production, it is also critical to assemble them on board using standard Surface Mount Technologies (SMT) without the need for under-fill. This research aims to demonstrate reliable 400 micron pitch solder interconnections from low CTE glass interposers directly assembled onto organic boards by overcoming the above challenges using two approaches; 1) Stress-relief dielectric build up layers on the back of the interposer, 2) Polymer collar around the solder bumps for shear stress re-distribution. A comprehensive methodology based on modeling, design, test vehicle fabrication and characterization is employed to study and demonstrate the efficacy of these approaches in meeting the interposer-to-board interconnection requirements. The effect of varying geometrical and material properties of both build-up layers and polymer collar is studied through Finite Element Modeling. Interposers were designed and fabricated with the proposed approaches to demonstrate process feasibility.

Degree

thesis:*
Level thesis:degree_level
Masters
Department dc:contributor.department
Electrical and Computer Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Menezes, Gary
Advisors dc:contributor.advisor
  • Sitaraman, Suresh K.
  • Tummala, Rao R.
  • Sundaram, Venky

Subjects

dc:subject × 6

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/51781

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Menezes, Gary. Modeling, design, fabrication and characterization of glass package-to-PCB interconnections. Masters thesis, Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/51781