Back to search

Georgia Institute of Technology

A dynamic holding method to avoid bus bunching on high-frequency transit routes: from theory to practice

Abstract

dc:description.abstract

On frequent transit routes, there is a tendency for vehicles to bunch together, causing undue passenger waiting time. To avoid bus bunching, transit agencies strive to maintain even headways by holding vehicles at control points. The increasing availability and accuracy of real-time information enables transit agencies to apply dynamic holding methods that can stabilize their high-frequency routes based on the current operating conditions. This dissertation explores how real-time information can be used to stabilize high-frequency routes, from theory to practice. In the first part of this dissertation, a closed-form method to avoid bus bunching is derived by backward induction as a non-Markovian stochastic decision process. The method can minimize expected headway variance without using buffer time: the rate of vehicle dispatch is equal to the rate of arriving vehicles. The decision process is based on a set of arrival time probability distributions that is updated at each decision epoch. The method is therefore able to minimize the waiting time of passengers arriving at stops according to a Poisson Process. The closed-form method is verified by simulation. In the second part of this dissertation, the method derived previously is compared to holding methods used in practice and recommended in the literature. The methods are tested on a simulation of Tri-Met Route 72 in Portland, OR, using historical data. A series of sensitivity analyses are conducted to evaluate the impact of parameter choice, control point selection, and prediction accuracy on the performance of each method. The methods based on predictions, and in particular the proposed method, were found to yield the best compromise between holding time and headway stability. We found that prediction errors had a marginal impact on the performance of these methods until they reached a breaking point, beyond which they had a disproportionate effect. In the third part of this dissertation, the proposed holding method is implemented in three high-frequency transit routes: the Atlanta Streetcar, the VIA Route 100 in San Antonio TX, and the Georgia Tech Red Stinger Route. The performance of the proposed method is compared to the schedule that is currently used. The different institutional frameworks of the agencies that collaborated on this project and their impact on implementation are compared. In addition, the level of adoption by supervisors, dispatchers and operators and their effect on compliance are analyzed. Finally, the practical lessons learned from implementing a real-time dispatching method on high-frequency routes are discussed.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Civil and Environmental Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Berrebi, Simon J.
Advisor dc:contributor.advisor
  • Watkins, Kari E.
Committee members dc:contributor.committeemember
  • Laval, Jorge A.
  • Rodgers, Michael O.
  • Alan, Erera L.
  • Meyer, Michael

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/58705

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Berrebi, Simon J.. A dynamic holding method to avoid bus bunching on high-frequency transit routes: from theory to practice. Doctoral thesis, Georgia Institute of Technology, 2017. http://hdl.handle.net/1853/58705