Back to search

Georgia Institute of Technology

Single-phase liquid cooling for thermal management of power electronic devices

Abstract

dc:description.abstract

Power electronic devices such as MOSFETs, HEMTs, and IGBTs often face reliability challenges due to poor thermal management during device operation at high power densities. In the conventional approach, such devices are packaged on power electronic substrates (e.g., direct bonded copper (DBC)) which is then attached to heat spreaders and ultimately cold plates to remove dissipated thermal energy. Thus, there are several critical layers that add to the thermal resistance of the overall design that limit the heat dissipation from power electronic devices. By eliminating layers, the integration of liquid cooling techniques has shown promise to significantly reduce (up to 25% reduction) in the thermal resistance in power electronic cooling systems as compared to the thermal resistance found using a conventional cold plate cooler design. Thus, the main objective of this work is to evaluate vertical (perpendicular fluid flow) and horizontal (parallel fluid flow) cooling schemes with integrated cooling on the backside of the DBC substrate. The cooling systems in this work utilize directly integrated cooling of electronics (DICE) techniques with enhanced heat transfer through microstructured features integrated into the DBC. For this work, each cooling method underwent a pseudo-optimization design analysis to identify the relevant contributors to the performance of the heat sink designs. Parameters such as pressure drop, pumping power, and heat transfer coefficient were used to assess industry and manufacturing tradeoffs associated with each design. Through experiments, the pressure drop, chip junction temperature, and inlet and outlet temperatures were measured and will be presented. To validate the experimental results, numerical and analytical models were developed to simulate the experimental environment and will be presented. Finally, the prospects for integrating these techniques into real power electronic packaging architectures will be discussed.

Degree

thesis:*
Level thesis:degree_level
Masters
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Agbim, Kenechi Aretha
Advisor dc:contributor.advisor
  • Graham, Samuel
Committee members dc:contributor.committeemember
  • Telenko, Cassandra
  • Smet, Vanessa

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/58752

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Agbim, Kenechi Aretha. Single-phase liquid cooling for thermal management of power electronic devices. Masters thesis, Georgia Institute of Technology, 2017. http://hdl.handle.net/1853/58752