Georgia Institute of Technology
Fabrication and modeling of high efficiency and stabilized P-type passivated emitter rear silicon solar cells (PERC)
Abstract
dc:description.abstractThe objective of this research is to achieve low-cost high-efficiency commercial-ready passivated emitter rear solar cells (PERC). Two specific aims are: 1) modeling and fabrication of high efficiency solar cells to reduce module cost for a given power output, and 2) reducing or eliminating of the widely observed light-induced degradation in PERC cells to increase power output for a given time. In the first part, fabrication of high-efficiency commercial-ready solar cells is achieved by technology innovations such as ion-implantation, multi-busbar, new screen design, field effect passivation by negative charge injection and selective emitter. Also, a practical and manufacturable PERC cell efficiency roadmap is established by Sentaurus 2D device modeling. In the second part, indium doped PERC solar cells are fabricated to eliminate light-induced degradation, since the source of degradation is boron-oxygen complexes in the boron doped p-type wafer. Also, a regeneration treatment to deactivate boron-oxygen complexes by appropriate light and heat exposure is developed to achieve stabilized boron-doped PERC solar cells.
Degree
thesis:*- Level thesis:degree_level
- Doctoral
- Department dc:contributor.department
- Electrical and Computer Engineering
- Grantor dc:publisher
- Georgia Institute of Technology
- Year dc:date.issued
- 2017
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Cho, Eunhwan
- Advisor dc:contributor.advisor
-
- Rohatgi, Ajeet
- Committee members dc:contributor.committeemember
-
- Gaylord, Thomas K.
- Kippelen, Bernard
- Peterson, Andrew F.
Subjects
dc:subject × 4Rights
- Language dc:language.iso
- en_US
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- http://hdl.handle.net/1853/59174