Back to search

Georgia Institute of Technology

An investigation of non-standard angle composite laminate design

Abstract

dc:description.abstract

Carbon Fiber Reinforced Plastics (CFRP) have become indispensable structural materials in the aerospace industry. They offer much higher specific stiffness and strength compared to the aluminum alloys that they have come to replace. The ability to tailor the stiffness and strength of composite laminates is a unique advantage over metals allowing for optimization at the material level. The ability to tailor the stiffness and strength for applications has been limited by the standardization of laminate design by the aerospace industry. Laminate design has been standardized into a set of rules, which limit the options available to a designer. Current laminate design allows for alignment of fiber reinforcement along only four standard directions. Other restrictions such as symmetry about the mid plane and balance are also strictly enforced. This thesis studies the effects of using non-standard (NS) angles for the ply orientation when designing a laminate. To develop NS designs that can be easily compared with standard designs, this study proposes a stiffness matching method. This method allows one to design non-standard laminates that match the in-plane stiffness of standard composite layups. This method has been validated against a stiffness matching method proposed prior to this work. NS designs that match the stiffness of a typical wing skin layup were developed based on the stiffness matching method proposed in this thesis. The theoretical strengths of these NS designs were calculated based on First Ply Failure (FPF) theory. Based on the significantly improved theoretical strengths of the NS designs when compared to the standard wing skin design, physical samples of the standard and NS designs were fabricated and tested. As notched compressive strength is often the limiting factor in composite structures, Open Hole Compression (OHC) testing has been carried out on non-standard and standard designs. The failure modes and failure strengths for the designs were analyzed. The NS designs were observed to be weaker due to fiber discontinuity. Modifications to the testing method have been proposed for accurate characterization of the strength of NS laminates.

Degree

thesis:*
Level thesis:degree_level
Masters
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Batra, Gaurav Makoto
Advisor dc:contributor.advisor
  • Colton, Jonathan S.
Committee members dc:contributor.committeemember
  • Kalaitzidou, Kyriaki
  • Muzzy, John

Subjects

dc:subject × 5

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/59859

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Batra, Gaurav Makoto. An investigation of non-standard angle composite laminate design. Masters thesis, Georgia Institute of Technology, 2018. http://hdl.handle.net/1853/59859