Back to search

Georgia Institute of Technology

Electronics design for high density CMUT array based ultrasound imaging system

Abstract

dc:description.abstract

In catheter based ultrasound imaging applications, gathering real-time imaging data from a large number of transducer array elements is extremely challenging with the standard interconnect and transducer technology as there is a restriction on cable count due to the diameter of the catheter. Intracardiac Echocardiography (ICE) imaging systems require many cables connecting the transducer array elements at the tip of the catheter to the backend imaging systems. Reducing the number of cables using highly integrated front-end electronics, is essential for 3-D ICE imaging systems with 2-D imaging arrays. Cable reduction would also reduce the cost of the current 2-D imaging ICE catheters with 1-D imaging arrays and can enable to ICE imaging under MRI by reducing the RF induced heating of the catheters. Current approaches to cable reduction tend to rely on area and power-hungry circuits to function, making them unsuitable for use in catheters. This research explores the design of the CMOS receiver circuitry which implements a Time Division Multiplexing (TDM) scheme to address the receive cable restrictions of the catheter. This approach, implemented in the form of a direct digital demultiplexing technique, allows for a reduction in the number of analog signal processing stages required. Receive multiplexing alone is not enough to reduce the cable count since the same elements in the arrays are used as transmitters. Therefore, the CMOS circuitry should integrate transmit beamforming as well. For this purpose, this study also explores an on-chip programmable transmit beamformer circuit for producing focused and steered transmit beams. In this thesis, a system which uses an e cient real-time programmable on-chip transmit beamformer circuitry to reduce the cable count on the transmit side and analog 8:1 Time Division Multiplexing with Direct Digital Demodulation to reduce the cable count on the receive side is described and initial imaging results are presented.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Electrical and Computer Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rashid, Muhammad Wasequr
Advisors dc:contributor.advisor
  • Ghovanloo, Maysam
  • Degertekin, F. Levent
  • Hasler, Jennifer
Committee members dc:contributor.committeemember
  • Inan, Omer
  • Sabra, Karim
  • Brand, Oliver
  • Freear, Steven

Subjects

dc:subject × 9

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/60180

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Rashid, Muhammad Wasequr. Electronics design for high density CMUT array based ultrasound imaging system. Doctoral thesis, Georgia Institute of Technology, 2017. http://hdl.handle.net/1853/60180