Back to search

Georgia Institute of Technology

Ultra-thin polymer dielectric materials and ultra-small via and trench processes for 20micron bump pitch re-distribution layer (RDL) structures for high density packages

Abstract

dc:description.abstract

Higher interconnect density between multiple chips is required because of the need of the high bandwidth data transmission for many electronic systems, such as smart mobile devices, cloud and edge computing, and in machine learning in autonomous driving and robotics. Although side-by-side integration with 2.5D silicon interposers with back end of line (BEOL) wafer processes have enabled the high input-output (I/O) density interconnections, they have challenges in electrical performance and cost. Meanwhile, organic package substrates have higher electrical performance and low cost capability, however, they have been unable to bridge the I/O pitch gap from 80 µm to 20 µm, because of the dimensional instability and warpage. The objectives of this research are to explore and demonstrate ultra-thin dry film polymer materials, processes and lithographic structures to form copper-polymer re-distribution layers (RDL) with silicon wafer-like interconnection densities, but at lower capacitance, resistance and at lower cost. This research is focused on addressing the limitations of current approaches by; (a) design and demonstration of a novel ultra-thin RDL dielectric material that satisfies the properties for RDL with scalability of conductor wiring to 2 µm by SAP, (b) investigation of an innovative embedded trench process with fly-cutting planarization tool to achieve 5 µm diameter micro-vias, and 2 µm wiring traces with high positional accuracy at ±1-2 µm. Detail design of the dielectric material was based on the 50 ohm impedance matching calculation and thermo-mechanical finite element modeling approach. Additionally, new dielectric materials with excellent properties were introduced, and in-depth analysis of their electrical, thermo-mechanical and adhesion properties were performed. To develop the RDL wiring process, a new embedded trench formation process was developed using parallel mask projection processes and an innovative planarization process to address the challenges of RDL scaling with current processes.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Materials Science and Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Suzuki, Yuya
Advisor dc:contributor.advisor
  • Tummala, Rao R.
Committee members dc:contributor.committeemember
  • Vogel, Eric
  • Wong, C. P.
  • Sitaraman, Suresh
  • Sundaram, Venky

Subjects

dc:subject × 6

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/60654

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Suzuki, Yuya. Ultra-thin polymer dielectric materials and ultra-small via and trench processes for 20micron bump pitch re-distribution layer (RDL) structures for high density packages. Doctoral thesis, Georgia Institute of Technology, 2017. http://hdl.handle.net/1853/60654