Back to search

Georgia Institute of Technology

Experimental benchmarking of CVD graphene for memory and interconnect applications

Abstract

dc:description.abstract

CVD-grown graphene was studied as a potential candidate for memory as well as electrical interconnect applications. An average field-enhancement factor (β) of ~2.06 with a standard deviation of 0.33 was extracted using a modified Fowler-Nordheim equation for CVD-grown single layer graphene based on an MOS structure. This modest value solves the contradiction in prior experiments that reported a field enhancement factor of few thousands but only 30-40% improvement in the write voltage of floating gate memory devices. The experimentally extracted β value was used to drive higher-level circuit simulations on 64-bit NAND strings and it was shown that 2D NAND programming time and/or programming voltage can be suppressed to 10ns and 5V, respectively, based on a 65 nm process node. Furthermore, a simple two-step lithography process to fabricate graphene devices with mobilities up to ~9,500 cm2/V.s at a carrier concentration of 4x1012 cm-2 has been presented to assess the performance of graphene for interconnect applications. Even though the reported mobility is more than 2x higher than the average recorded mobility, MFP analysis shows that the MFP attained still needs to at least be doubled in order to achieve a significant improvement in the energy-delay product over copper interconnects. Better performance can be achieved by considering multilayer graphene instead of single layer graphene. An accurate method to determine the interlayer resistivity of multilayer graphene is proposed based on the direct measurement of the resistance at a mono-to-bi layer step and feeding the measured resistance to a distributed resistance model to extract the interlayer resistivity. The extracted values were used to analyze the performance of MLG interconnects in terms of interconnect delay, energy dissipation, and energy-delay product. The interlayer resistivity of CVD-grown AB-stacked bilayer graphene was found to be in the range of 50-140 Ω⋅m, which is two-five orders of magnitude larger than the previously reported values for AB-stacked graphite. On the other hand, twisted BLG shows 3-5x lower interlayer resistivity compared to AB-stacked BLG with the interlayer resistivity monotonically decreasing with increasing the twist angle. The total resistance of twisted BLG was found to be about one order of magnitude lower than its AB-stacked counterpart, leading to a lower delay and energy-delay product in twisted graphene.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Electrical and Computer Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nashed Bassely Said, Ramy
Advisor dc:contributor.advisor
  • Naeemi, Azad
Committee members dc:contributor.committeemember
  • Davis, Jeffrey A.
  • Bakir, Muhannad S.
  • Vogel, Eric M.
  • Catthoor, Francky

Subjects

dc:subject × 8

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/61736

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Nashed Bassely Said, Ramy. Experimental benchmarking of CVD graphene for memory and interconnect applications. Doctoral thesis, Georgia Institute of Technology, 2019. http://hdl.handle.net/1853/61736