Back to search

Georgia Institute of Technology

Process Development of Drawcasting Structures in Thermoplastic Films

Abstract

dc:description.abstract

Polymer surfaces patterned with high-aspect-ratio (AR) micro- or nanostructures are challenging to manufacture on a large scale due to steep fabrication costs and the lack of high-throughput patterning techniques. Furthermore, most surface patterning techniques for high-AR polymer structures performed on a laboratory scale are restrictive in terms of the geometries and materials they can accommodate. In this work, a new process for patterning polymer surfaces with high-AR structures, termed drawcasting, was developed and parameterized. Drawcasting is a viscous deformation process that has been shown to reliably produce arrays of high-AR polymer microstructures whose geometry can be tuned easily by changing a variety of process parameters and has been applied to both thermoplastics and curable resins. The relationship between the properties of the materials used in drawcasting and the process parameters and obtained structures was investigated in this work. The development of the drawcasting system as well as innovations in process optimization techniques such as photo- and soft lithography and microscopy are presented. The process is highly rate-, time-, and temperature-dependent, and it necessitates an understanding of a given polymer’s thermal, wetting, and rheological behavior with respect to the selected process parameters. The properties of three different thermoplastics were investigated as they relate to the drawcasting process. Much of this data was also gathered to support thermofluid models in development. Arrays of three-dimensional structures over a broad range of length scales fabricated using the drawcasting system are presented, and methods to further improve the process in order to fabricate arrays of smaller structures over larger areas are discussed.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Materials Science and Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Copenhaver, Katherine
Advisor dc:contributor.advisor
  • Nadler, Jason
Committee members dc:contributor.committeemember
  • Ng, Richard
  • Shofner, Meisha
  • Tsukruk, Vladimir
  • Jacob, Karl

Subjects

dc:subject × 8

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1853/64032

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Copenhaver, Katherine. Process Development of Drawcasting Structures in Thermoplastic Films. Doctoral thesis, Georgia Institute of Technology, 2019. http://hdl.handle.net/1853/64032