Back to search

Georgia Institute of Technology

Analytical modeling of part distortion in additive manufacturing

Abstract

dc:description.abstract

In recent years, additive manufacturing (AM) technology has gained significant attention as a novel manufacturing method for prototyping and complex design. It provided extended flexibility in manufacturing but needs to improve quality control. With repeated cooling and heating cycles, the printed parts often suffer from severe residual stress and distortion. While Finite Element Method provided a way to rough predict these results, the extensive calculation cost and inaccuracy when dealing with sophisticated geometry made it a less efficient tool for industrial use. In this dissertation, a new analytical model was proposed to fast predict the residual stress and distortion of the printed part. A moving heat source model was used for temperature profile calculations with a boundary heat sink added to include the effect of the side surface. Sections on the part with the same boundary conditions were grouped to avoid repeated calculation. The mechanical model was applied to get the thermal stress and residual stress. Based on the residual stress input, distortion was calculated. The proposed modal also took in the scan strategies, significantly affecting residual stress and distortion. To validate the model, a step-by-step comparison to experimental data, both from literature and experiment, was done, and the proposed model gained reasonable accuracy. Sets of scaled XY crossing part was printed with AlSi10Mg. Both residual surface stress and in-depth residual stress were measured and compared with the analytical model prediction. For distortion, the printed XY parts were laser scanned to have the surface data, which was further transferred into deflection data and compared to prediction. Not as expected, the experiment's residual stress profile was not affected by the hatching space. During the modeling process, it was found that only heat sinks on the boundaries 1 mm away from the point of interest were influential in the final temperature profile when calculating temperature. Similar threshold values were found in thermal stress calculation and could be used as a foundation to further simplify the calculation process without damaging its validity.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cai, Linger
Advisor dc:contributor.advisor
  • Liang, Steven Y.
Committee members dc:contributor.committeemember
  • Yee, Shannon
  • Melkote, Shreyes N.
  • Saldana, Christopher J.
  • Garmestani, Hamid

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/1853/72046

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Cai, Linger. Analytical modeling of part distortion in additive manufacturing. Doctoral thesis, Georgia Institute of Technology, 2023. https://hdl.handle.net/1853/72046