Georgia Institute of Technology
Medium-voltage current-source solid-state transformer
Abstract
dc:description.abstractThe objective of this research is to develop circuit topologies, control methods, and medium-voltage (MV) prototypes of the current-source solid-state transformer (SST). Recent years have witnessed significant growth in renewable energy and electrified transportation resources. The MV SST is a promising solution to replace the conventional line-frequency transformer and integrate these resources into DC or AC power grids with reduced footprint and power loss. The MV SST prototypes in the literature are based on voltage-source topologies. The voltage-source SST topologies have the drawbacks of complex multi-stage conversion, high dv/dt, high volume, and low efficiency. In this dissertation, single-stage current-source SST topologies are proposed for higher efficiency and density, including universal circuits and reduced-switch circuits. Based on 3.3 kV SiC reverse-blocking modules, a 5 kV DC and a 7.2 kV AC multiport current-source SST prototype are developed to verify the proposed circuit topologies. A grounding method is also developed to mitigate the additional device voltage stress from ground leakage current. Significantly, it is the first time that MV current-source SST experimental prototypes and results have been reported. Conventional voltage-source SST has bulky DC-link, which enables the use of proportional-integral controller. However, the modular current-source SST has fast dynamics from reduced DC-link. Such modular reduced DC-link converter is proposed as stacked low-inertia converter (SLIC). A model predictive priority-shifting (MPPS) control method is proposed for the SLIC. The performance is analyzed and verified under parameter mismatches, low-inertia DC-link, and time delay. A clamping modulation is also proposed to address the voltage sharing of reverse-blocking devices. Besides these control methods for basic operation, control methods are proposed for advanced metrics. First, a direct DC-link predictive control method for active power decoupling and higher density is proposed. Second, a partial-power control method is proposed for higher efficiency of the multiport configuration. Third, a dynamic DC-link minimization control method is proposed for higher efficiency. These control concepts are verified on the 5 kV and the 7.2 kV SST prototypes.
Degree
thesis:*- Level thesis:degree_level
- Doctoral
- Department dc:contributor.department
- Electrical and Computer Engineering
- Grantor dc:publisher
- Georgia Institute of Technology
- Year dc:date.issued
- 2022
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Zheng, Liran
- Advisor dc:contributor.advisor
-
- Divan, Deepakraj M.
- Committee members dc:contributor.committeemember
-
- Saeedifard, Maryam
- Habetler, Thomas
- Grijalva, Santiago
- Graber, Lukas
- Enjeti, Prasad
Subjects
dc:subject × 14- Solid-state transformer (SST)
- Power electronic transformer (PET)
- Medium-voltage (MV) power electronics
- Current-source converter (CSC)
- Stacked low-inertia converter (SLIC)
- Model predictive priority-shifting control (MPPS)
- Model predictive control (MPC)
- Medium-frequency transformer (MFT)
- Input-series output-parallel (ISOP)
- Soft switching
- Renewable energy
- Energy storage
- Electric-vehicle (EV) fast charging
- Smart grid
Rights
- Language dc:language.iso
- en_US
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- https://hdl.handle.net/1853/72989