Back to search

Georgia Institute of Technology

Single-Phase and Boiling Flows in Traditionally and Additive Manufactured Foams for Inverter Thermal Management

Abstract

dc:description.abstract

Wide-bandgap (WBG) devices are attractive replacements for silicon devices currently used in electric vehicle (EV) inverters due to favorable properties including increased breakdown voltages, faster switching, and higher operating temperatures. These properties allow for smaller packages from device to system levels, but taking full advantage of the benefits requires a system-level reexamination and redesign. The present work examines cooling solutions that could provide improved form factor and thermal management in EV inverters. Metal foams are appealing due to their high specific surface area, high thermal conductivity, and low relative density. Combining this with additive manufacturing (AM) leverages the aforementioned advantages along with those of AM, including eliminating thermal attachment materials and allowing for complex designs. Traditionally manufactured metal foams were compared to additive manufactured metal foam samples. Post experimental validation, additional numerical models investigated the flow behavior, effect of varying attachment thermal conductivities, and interfacial heat transfer. Representative geometries were used in conjunction with volume-averaged flow simulations to evaluate metal foams as a thermal management solution for inverters, and to demonstrate AM foams' ability for targeted cooling. Boiling simulations examined multiple geometric modifications to microchannels. Resulting heat transfer and pressure drop changes were quantified, with bubble dynamics providing insight into microscale flow boiling phenomena while laying the groundwork for future boiling simulations in AM foams. Experimental and numerical work investigated flow boiling in AMMFs with vapor pathways for efficient bubble removal. Experimentally validated simulations demonstrated the advantages of AM, particularly with regards to pressure drop. Changes in bubble dynamics resulting from pathway integration were investigated using the numerical models.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Broughton, Justin
Advisor dc:contributor.advisor
  • Joshi, Yogendra
Committee members dc:contributor.committeemember
  • Kumar, Satish
  • Smet, Vanessa
  • Narumanchi, Sreekant
  • Bakir , Muhannad

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/1853/73037

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Broughton, Justin. Single-Phase and Boiling Flows in Traditionally and Additive Manufactured Foams for Inverter Thermal Management. Doctoral thesis, Georgia Institute of Technology, 2022. https://hdl.handle.net/1853/73037