Back to search

Georgia Institute of Technology

Development and Application of an Article-Based Evaluation of Focal Plane Error in Laser Powder Bed Fusion

Abstract

dc:description.abstract

Qualifying laser and optics systems in laser powder bed fusion (LPBF) additive manufacturing (AM) is critical to ensuring repeatable machine operation and predictable final component properties; a key to the widespread adoption of AM for producing safety-critical parts. In LPBF, an f-θ lens focuses a laser beam over some flat working region to melt and fuse powder material into a bulk component. The focal plane, defined as the surface on which the beam is focused by the f-θ lens, is nominally flat and coincident with the build plane, which is defined by the machine powder recoating system. The development and application of a low-cost, scalable, artifact-based method for measuring the focal plane deviation from the build plane over the working area for an LPBF system is presented. Anodized aluminum samples are etched at varying offsets from the nominal build plane and etched track widths are measured to estimate the beam diameter and generate a beam caustic over the build platform. The minimum location of a hyperbolic fit to the track width data is taken to be the focus location of the beam along the machine z-axis. The location of the focus point is mapped over the build platform. A total focus location variation of 2.77 mm was measured on an EOS M280. It is also demonstrated that focal plane orientation error can be evaluated with high accuracy, employing this measurement method to qualify the alignment of, and calibrate, LPBF optics systems. An introduced known change in optics system misalignment in an EOS M280 was evaluated to within 0.27mm. With knowledge of the nominal focal surface of the system, optics system alignment may potentially be evaluated on this order of accuracy. Additionally, the optimal materials and process parameters for this measurement method are identified. An anodized aluminum process map is generated for a set of laser power, scan speeds, and beam defocus. The track width and variation in track widths at each set of parameters are evaluated and establish an optimal parameter set for use with the focal plane error measurement method developed. An optimal linear energy density operating range for making beam spot size measurements was determined to be between 0.06 – 0.1 J⁄mm, referred to as the ”Ablation – Moderate Melting” regime, producing tracks with an average width of 74.3 µm an a standard deviation in width measurements of 3.3 µm.

Degree

thesis:*
Level thesis:degree_level
Masters
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dushaj, Enea
Advisors dc:contributor.advisor
  • Saldana, Christopher
  • Saldaña, Christopher J.
  • Fu, Katherine
Committee member dc:contributor.committeemember
  • Kurfess, Thomas

Subjects

dc:subject × 15

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/1853/75113

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Dushaj, Enea. Development and Application of an Article-Based Evaluation of Focal Plane Error in Laser Powder Bed Fusion. Masters thesis, Georgia Institute of Technology, 2023. https://hdl.handle.net/1853/75113