Back to search

Georgia Institute of Technology

Design of Compact Condensers Enabled by Additive Manufacturing

Abstract

dc:description.abstract

Condensers are essential components in heat pump, refrigeration, and Rankine cycles, as well as a variety of industrial and chemical processes. However, condensation at low vapor qualities is characterized by poor heat transfer coefficients, requiring large surface areas to achieve complete condensation. This adds volume and weight to the condenser, resulting in high material costs, difficulty of transportation, and large space requirements to house the condenser. Novel designs for condensers that take advantage of the capabilities of metal additive manufacturing are developed to achieve enhanced heat transfer and reduce the volume of water-cooled condensers. Specifically, tube size, spacing, and the number of tubes are tailored and varied along the condensation length to yield high heat transfer rates at all stages of condensation while maintaining low pressure drops. A genetic algorithm is used to optimize the size, number, and spacing of tubes at many points throughout the condensation process. Under the same operating conditions, this genetic algorithm results in a condenser 77% smaller than one manufactured with conventional methods. A technique to periodically drain liquid condensate from the working fluid channels, thereby minimizing the thermal resistance presented by the condensed liquid film, is introduced and evaluated for condensers with representative heat duties of 50 kW and 2.4 GW. This technique achieves a reduction in condenser length of 8.3% to 9.4% for the 2.4 GW case, but an increase in length is found for the 50-kW case due to a corresponding decrease in mass flux. Thus, this drainage option should be employed in cases with high initial mass flow rates of the condensing fluid. The design methods and insights gained from this work will guide the development of additively manufactured compact condensers.

Degree

thesis:*
Level thesis:degree_level
Masters
Department dc:contributor.department
Mechanical Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Giometti, Ryan White
Advisor dc:contributor.advisor
  • Garimella, Srinivas
Committee members dc:contributor.committeemember
  • Ghiaasiaan, Mostafa
  • Simmons, Richard

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/1853/76926

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Giometti, Ryan White. Design of Compact Condensers Enabled by Additive Manufacturing. Masters thesis, Georgia Institute of Technology, 2024. https://hdl.handle.net/1853/76926