Back to search

Georgia Institute of Technology

Design of polysaccharide-based materials systems for applications in high humidity

Abstract

dc:description.abstract

The prevalent utilization of petroleum-derived polymers has resulted in significant environmental impacts including solid waste pollution and substantial contributions to greenhouse gas emissions, owing to their slow degradation and limited recyclability. Nearly half of all plastic waste can be traced back to materials used for packaging, which are ubiquitous and necessary for the preservation of food, electronics, pharmaceuticals, cosmetics, and more. Driven to displace these traditional plastics with more sustainable alternatives, decades of research efforts have focused on the development of renewably sourced and biodegradable materials that mimic the functional properties of commercial packaging plastics while mitigating their environmental impacts. Despite this, novel bio-based materials rarely meet the performance criteria required to compete with commercial products. One of the most common failures of bio-based polymers and composites is their moisture-dependent barrier and mechanical properties, which often deteriorate in high humidity environments. This limitation is widely recognized in the literature, yet we clearly lack a complete understanding of the mechanisms by which the moisture sensitivity of bio-based polymer systems can be controlled. The aim of this thesis is to explore these mechanisms, and to develop the tools and framework necessary to enable intentional design of optimally moisture-resistant bio-based materials systems. In the first Chapter of this thesis, we discuss different approaches to sustainable materials design, and emphasize polysaccharides as a promising class of polymers for high volume applications such as packaging. We briefly outline important features of polysaccharides that affect their properties and explore the successes and failures of polysaccharide-based packaging materials. Keeping in mind the mechanisms of permeation in polymer systems, we outline a plan to address the most prolific failure of polysaccharide-based packaging – moisture-dependent functional properties. In Chapter 2, we explore in detail the most classical approach to mitigate swelling in a polymer matrix. We show on the example of carboxymethyl cellulose that chemical crosslinking with citric acid can be exploited to precisely control the moisture sensitivity of cellulose-based structures. Specifically, we demonstrate that the water vapor transmission rate (WVTR) of carboxymethyl cellulose can be manipulated in a controlled fashion over three orders of magnitude. The lowest WVTR value, obtained for an optimal crosslinker content, is one order of magnitude lower than that measured for poly(ethylene terephthalate) even up to 65% relative humidity. Nonetheless, when the humidity is increased further, even these highly crosslinked materials exhibit humidity-dependent behavior, suggesting that hydroxyl side groups are not the only hydrophilic moieties responsible for the moisture sensitivity of polysaccharide-based materials. Suspecting that the crosslinker itself may introduce new modes to transport water in the polymer matrix, we consider in Chapter 3 how water-crosslinker interactions affect the mechanical and barrier properties of highly crosslinked polysaccharide-based films. Utilizing the same carboxymethyl cellulose/citric acid model system used in Chapter 2, we vary the nature of the water-crosslinker interaction by adding different amounts of titanium oxide hydrate. We find that the hydration state of the crosslinker surprisingly has no effect on the WVTR at high humidity, but there is a plasticization effect with respect to the mechanical properties which manifests as a simultaneous increase in the flexibility/ductility and strength of the films as the fraction of titanium oxide hydrate is increased, mitigating embrittlement induced by crosslinking with citric acid alone. Inferring from Chapter 3 that water-crosslinker interactions have a negligible effect on the transmission rate of water at high humidities, we turn our attention in Chapter 4 to the ionized or ionizable side groups that are present in carboxymethyl cellulose as well as most other polysaccharides. The variety of possible side group chemistry complicates the otherwise simple crosslinking approach, considering that different side groups do not necessarily participate in crosslinking reactions under the same conditions. Alternatively, we explore polyelectrolyte complexation as a versatile route to form physical crosslinks between any oppositely charged polysaccharides and limit the hydration of ionized side groups. We use carboxymethyl cellulose and chitosan, two commercially available polysaccharides, as a model polyelectrolyte complex system. We find that the degree of ionization of each polysaccharide in the solid state depends on the processing pH and the specific acid or base used to control pH. We also explore how the number of intrinsic ion pairs can be tuned by varying the processing conditions or film composition, leading to properties consistent with increased moisture resistance including decreased WVTR. Promisingly, this approach is easily implemented concurrently with chemical crosslinking of hydroxyl groups, resulting in water vapor transmission rates approaching that of poly(styrene), even at 80% relative humidity. This thesis concludes in Chapter 5 by reflecting on the primary contributions of Chapters 2–4, and probing specific directions for future work to build upon each materials system considered thus far. We discuss closer investigations of certain process variables, additional characterizations, and alternative application spaces which were not explicitly considered in this thesis. Finally, we provide a perspective on the future of sustainable packaging and imagine a pathway to commercialization. Although this thesis emphasizes polysaccharide-based materials, we recognize their limitations and highlight important knowledge gaps that must be addressed to enable the advancement of sustainable packaging.

Degree

thesis:*
Level thesis:degree_level
Doctoral
Department dc:contributor.department
Chemical and Biomolecular Engineering
Grantor dc:publisher
Georgia Institute of Technology
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hickman, Tanner John
Advisors dc:contributor.advisor
  • Meredith, J. Carson
  • Stingelin, Natalie
Committee members dc:contributor.committeemember
  • Brettmann, Blair K.
  • Luettgen, Christopher O.
  • Shofner, Meisha L.

Subjects

dc:subject × 5

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/1853/78579

Chain of custody

source
Harvested from
Georgia Tech
Base URL
repository.gatech.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hickman, Tanner John. Design of polysaccharide-based materials systems for applications in high humidity. Doctoral thesis, Georgia Institute of Technology, 2024. https://hdl.handle.net/1853/78579