Georgia Institute of Technology
In-slot cooling for high power density electric motor
Abstract
dc:description.abstractElectric motor is a key component of the electric vehicle (EV) drivetrain as it converts electrical energy into mechanical energy. Therefore, a traction motor with high power density is essential to improve the overall performance of the EV drivetrain. Permanent magnet synchronous motors (PMSM) are commonly used in EV powertrains because of their high power and torque densities. In a high-power-density electric motor, major heat loss occurs in the windings in the form of resistive heating. In a typical liquid-jacket cooled motor, high thermal resistance between the winding and the cooling medium limits heat extraction. Therefore, by moving the coolant closer to the winding, thermal resistance between the winding and coolant can be significantly reduced, and hence, the winding temperature can be maintained below the thermal limit. This dissertation numerically compares the electro-thermal performance of three embedded cooling techniques, namely direct winding heat exchanger (DWHX), embedded circular, and rectangular cooling channels within stator core, with conventional jacket cooling (JC). The results confirm that the DWHX approach provides the best performance compared to the other cooling techniques. However, DWHX suffers from high winding-liner contact resistance. To enhance heat extraction by eliminating this contact resistance, this research examines a novel concept of capillary flow-assisted evaporative cooling (EC) confined between the slot liner and active winding. Electro-thermal performance of the EC has been assessed and compared with JC using a combination of modeling and motorette testing. Results show that the EC can provide 106.2% higher steady-state rms current density compared to the JC and enable 30 s peak rms current density of 40.8 A/mm2 within the thermal limit of class H insulation of 180oC. Leveraging the enhanced electro-thermal performance of EC, this dissertation also presents an optimized design of a high-speed heavy rare-earth-free PMSM to meet the U.S. Department of Energy (DOE)’s 2025 power density target of 50 kW/L for EV motors. The optimized motor layout can provide a 10 sec. peak power density of 86.59 kW/L, which is ~73% higher than the DOE’s peak power density target. Furthermore, based on the EC and DWHX designs, this dissertation proposes a new concept of EC from side and middle liner (EC-SML) and the effectiveness of EC, DWHX, and EC-SML has been assessed for different motor topologies and slot sizes. The results confirm that EC and EC-SML provide the best electro-thermal performance for small-slot and large-slot motors, respectively. Finally, to overcome the high leakage risk of EC and EC-SML, a novel 3D-printable hollow liner cooling concept has been proposed, and the thermal performance of a 3D-printed hollow liner has been experimentally evaluated using an in-house motorette test bench.
Degree
thesis:*- Level thesis:degree_level
- Doctoral
- Department dc:contributor.department
- Mechanical Engineering
- Grantor dc:publisher
- Georgia Institute of Technology
- Year dc:date.issued
- 2024
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Tikadar, Amitav
- Advisor dc:contributor.advisor
-
- Kumar, Satish
- Committee members dc:contributor.committeemember
-
- Joshi, Yogendra
- Ghiaasiaan, S. Mostafa
- Smet, Vanessa
- Divan, Deepakraj M.
Subjects
dc:subject × 5Rights
- Language dc:language.iso
- en_US
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- https://hdl.handle.net/1853/80049