Georgia Institute of Technology
Microenvironment Engineering of Electrocatalytic Interfaces: CO2 Reduction Reaction and H2O Electrolysis
Abstract
dc:description.abstractElectrification of chemical processes has gained increasing attention as a strategy to decarbonize the chemical industry. Among different electrification strategies, two have recently stood out in the past few years: (1) manufacturing traditional chemicals via novel electrochemical processes; and (2) producing electrolytic hydrogen gas for process heat generation. This thesis advances these two strategies by providing fundamental understanding to engineer the microenvironment of electrochemical reactions near catalytic interfaces and make value-added products from ordinary feedstocks. For that, two different reaction systems are studied as key emergent technologies aligning with each strategy: (1) the electrochemical reduction of CO2 to multi-carbon products; and (2) acidic water electrolysis to make green hydrogen. The first half of this thesis investigates the effect of temperature on the CO2 reduction reaction to multi-carbon products. Practical CO2 electrolyzers will likely operate at elevated temperatures due to heat transfer limitations, but the effects of temperature on this reaction had so far been elusive and heavily based on inference from product analysis alone. Surface enhanced spectroscopy techniques were used to deconvolute temperature-dependent phenomena affecting the surface CO population and the local pH near copper catalysts between 20 and 80 C. Mechanistic conclusions were drawn by establishing that CO coverage and migration to defect sites increase between 20 and 45 C and decrease between 45 and 80 C, which suggests that increasing temperature favors a CO hydrogenation route to C1 products over a CO coupling route to C2+ products. Local pH was found to be a critical parameter controlling product formation during CO2 reduction at elevated temperatures. In particular, higher temperatures led to stronger pH gradients consisting of greater surface to bulk pH differences over thinner boundary layers. This implies that most CO2 electrolyzers operating at elevated temperatures were evaluated under much more alkaline microenvironment conditions than previously conjectured at 25 C. Overall, this work shows that increasing temperature has a direct effect on the CO2 conversion route to C1 and C2+ products by uncovering the underlying reaction mechanism and microenvironment phenomena at elevated temperatures – this is a key step to rationalize product distribution and design solutions for enhanced multi-carbon products manufacturing in practical CO2 electrolyzers. The second half of this thesis investigates design rules to use acidic wastewater electrolysis to produce green hydrogen. An electrocatalytic platform that oxidizes formic acid – a representative organic species in wastewater that is typically processed without any energy reclamation – to CO2 was developed to lower the energy consumption for simultaneous hydrogen production (36.5% reduction at ~1 mA/cm2). The Langmuirian adsorption of formic acid and resulting coverage of the surface-bound formate anion were found to directly control formic acid oxidation catalysis. Two-dimensional correlation surface enhanced spectroscopy was used to probe the adsorption of formic acid between 25 and 65 C, and to determine the binding energy of formate on platinum (–46 kJ/mol at –0.2 V vs. RHE). Comparison of adsorption enthalpies and electrooxidation selectivities over platinum and copper catalysts suggests that binding strength to a metal surface is an important descriptor of formic acid oxidation catalysis. By benchmarking formic acid as an anodic substrate, this work establishes adsorption-controlled oxidation of organic acids as a general design principle for energy-efficient electrolyzers treating dilute organic waste streams. This paves the way to better engineer catalyst-liquid interfaces that promote electrochemical conversion of ubiquitous molecules to value-added products in electrolyzers.
Degree
thesis:*- Name thesis:degree_name
- Chemical Engineering, PhD
- Department thesis:degree_department
- Chemical and Biomolecular Engineering
- Grantor
- Georgia Institute of Technology
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Brandão, Victor D.
- Advisor dc:contributor.advisor
-
- Sievers, Carsten
- Committee members dc:contributor.committeemember
-
- Hatzell, Marta
- Fuller, Thomas
- McDaniel, Jesse
- Liu, Meilin
- ORCID person:identifier.orcid
Rights
- Language dc:language.iso
- English
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- https://hdl.handle.net/1853/81701