Georgia Institute of Technology
Design, Modeling, and Optimization of Adsorption Heat Pumps for Off-Grid Applications
Abstract
dc:description.abstractAdsorption heat pumps are heat-driven systems often used to provide heating, cooling, and/or refrigeration in areas with limited electricity or an abundant heat source. These systems benefit from limited electricity use, minimal moving parts, and the ability to provide output temperatures needed for a specific application. However, adsorption heat pumps can suffer from bulky system design, excessive manufacturing costs, and reduced efficiency compared to electrically driven heat pumps; therefore, careful attention is needed to reduce cost, size, and improve performance. This study focuses on the design, modeling, and experimental validation of an adsorption heat pump for off-grid applications. A review of the pertinent literature on adsorption heat pumps is conducted with a focus on applications in cooling and refrigeration, from which an adsorbent-adsorbate working pair of calcium chloride and ammonia is chosen. This working pair provides tunable operating conditions for refrigeration while minimizing the cost of materials. In the present study, a 10-kW adsorption refrigerator is designed for optimal performance and ease of manufacturing to ensure acceptance in the chosen market in developing countries. The adsorption and desorption rates of the chosen working pair are measured in a scaled system under pertinent operating conditions, and the results show that increasing packing density of the adsorbent reduces the rates of adsorption and desorption but has minimal effect on the adsorption capacity. Based on the experimental results and the literature, a predictive 2D heat and mass transfer model is developed and shown to accurately predict the uptake within 2.7%. A reduced-order model is also developed and fits the data within 5.4% and can be applied across the studied packing densities and as an adsorbent bed design tool. A comprehensive transient physics-based cycle model is developed and shows a cooling duty of ~8.5 kW with a COP of 0.23. A parametric sweep of cycle times and operating conditions is performed, and it is found that optimization of cycle time and heat recovery can further improve the COP to 0.28 at the same evaporator duty. A general scaling analysis for a cylindrical adsorbent bed is conducted for future design recommendations and compared to the two-dimensional heat and mass transfer model. Insights learned from this research are summarized, and recommendations for future research are made.
Degree
thesis:*- Name thesis:degree_name
- Mechanical Engineering, PhD
- Department thesis:degree_department
- Mechanical Engineering
- Grantor
- Georgia Institute of Technology
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Lockyear, Kristian Thomas
- Advisor dc:contributor.advisor
-
- Garimella, Srinivas
- Committee members dc:contributor.committeemember
-
- Ghiaasiaan, S
- Krishnakumar Menon, Akanksha
- Fuller, Thomas
- Lively, Ryan
- ORCID person:identifier.orcid
Rights
- Language dc:language.iso
- English
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- https://hdl.handle.net/1853/82107