Georgia Institute of Technology
Electrostatic Liquid Droplet Radiator for Space-based Nuclear Systems
Abstract
dc:description.abstractThe challenge of heat dissipation in the vacuum of space has been recognized since the earliest missions, exemplified by Laika’s fatal overheating aboard Sputnik 2. Although technologies for radiative heat rejection have since been developed and successfully implemented, the continued expansion of human activity in space will demand systems capable of handling far greater thermal loads. Nuclear fission reactors represent promising power sources due to their superior energy density, mass efficiency, and versatility compared to conventional systems. However, these reactors generate substantial waste heat that must be efficiently dissipated. Conventional radiators do not achieve the required mass-to-cooling ratios or operating temperatures necessary for nuclear space systems. Liquid droplet radiators (LDRs) have been proposed as a potential solution, offering exceptional mass-efficiency and the ability to operate at the 1000 K temperature range seen in high-temperature nuclear reactors. LDRs function by emitting micrometer-scale metal droplets that radiate heat into space before being collected to complete the thermodynamic cycle. An electrostatic droplet collection system presents several advantages over alternative approaches, particularly in minimizing droplet loss and maintaining performance under high heat loads. However, its behavior within the complex electrostatic environment of space remains insufficiently understood. The effects of solar ultraviolet radiation and charged particles on droplet charging, attraction dynamics, and collector power consumption have not been explicitly characterized and modeled. The objective of this thesis is to evaluate the feasibility of electrostatic droplet collection for LDRs applied to nuclear space systems by developing and analyzing physical models of the space electrostatic environment. Results have shown that droplets quickly reach a potential of a few volts in common space environments. It is also discovered that the electrostatically induced droplet sheet dispersion proves too great for many proposed LDR designs. In particular, low ejection velocities and small droplet spacing greatly exacerbate sheet dispersion. From this, optimized designs for a 0.5 MW, 1 MW, 5 MW, and 10 MW LDR were produced that remain feasible to recollect under electrostatic charging. The designs are then assessed under various slew maneuvers to characterize the ability to attract droplets for recollection. Unfortunately, significant attraction for the given designs was not observed. Lastly, an experiment is proposed to observe and characterize the trajectory of droplets in a low-gravity environment with magnetic attraction. On a parabolic flight campaign, ferrofluid droplets are emitted from an injector and fly towards a magnetic collector. The trajectory will be captured by two cameras, and an accelerometer will measure acceleration perturbations that assess the robustness of the collector to such perturbations. Additionally, droplet impact with the collector will be observed to evaluate the effect that splashing may have on recollection.
Degree
thesis:*- Name thesis:degree_name
- Aerospace Engineering, MS
- Department thesis:degree_department
- Aerospace Engineering
- Grantor
- Georgia Institute of Technology
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Herman, Jack
- Advisor dc:contributor.advisor
-
- Romero-Calvo, Álvaro
- Committee members dc:contributor.committeemember
-
- Dec, John
- Oefelein, Joseph
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- https://hdl.handle.net/1853/82156