Back to search

University of Glasgow

Mechanical properties of coating materials for use in the mirrors of interferometric gravitational wave detectors

Abstract

dc:description.abstract

This thesis contains measurements of temperature dependent mechanical loss, Young's modulus, and coefficient of thermal expansion of various amorphous optical coating materials of interest to gravitational wave detectors. The materials focused upon here are hafnia and titania-doped tantala. Measurements of the mechanical loss of hafnia indicate that at temperatures below 100 K, hafnia with heat treatments between As Deposited and 400 C have lower loss than tantala. However, the hafnia was found to be partially crystalline, which must be removed in order to meet the requirements of gravitational wave detectors. This may also improve the mechanical loss. Loss measurements of 25 and 55% As Deposited titania-doped tantala indicate that the activation energy of the two-level system loss mechanism is greatly different between the two doping concentrations. The Young's modulus of the coating materials was carried out using nano-indentation. The Young’s modulus of un-doped tantalum dioxide is reduced with increasing heat-treatment until the sample crystallizes between 600 and 800 C. The 25% doped samples exhibit similar trends, while the 55% doped samples have the opposite trend. Additional measurements have also been made for IBS hafnia and amorphous silicon coatings. The coefficient of thermal expansion was measured using a thermal bending setup, which extracts a combination of Young's modulus and coefficient of thermal expansion. The Young's modulus from the nano-indentation measurements was then used to extract the thermal expansion. For the 25 and 55% tantalum dioxide doped coatings did not vary with heat-treatment; however, it did appear to vary for the hafnia coatings.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
2012

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Abernathy, Matthew Robert

Subjects

dc:subject × 1

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Abernathy, Matthew Robert. Mechanical properties of coating materials for use in the mirrors of interferometric gravitational wave detectors. PhD thesis, University of Glasgow, 2012.