Back to search

University of Glasgow

Design and fabrication of AlGaN/GaN HEMTs with high breakdown voltages

Abstract

dc:description.abstract

Gallium nitride based transistors will make up a large portion of the power electronics and the microwave electronics sectors in the very near future, replacing traditional materials such as silicon (Si) and gallium arsenide (GaAs). The work in this thesis focuses on AlGaN/GaN high electron mobility transistors (HEMTs) in particular, with the aim of gaining the maximum potential out of them with regards to breakdown voltage. GaN based devices are able to breakdown at higher voltages compared to Si or GaAs due to its wider band gap (3.4 eV compared to 1.1 eV and 1.4 eV respectively) and although a lot of work has been invested into these devices over the last two decades or so, their full potential has yet to be realised and new solutions are still sought to provide a complete engineering solution which will make them competitive and commercially viable. One of the main obstacles is the high electric fields generated at the drain side of the gate which have prevented these devices from reaching their theoretical breakdown fileld of around 300 V/um. In an attempt to overcome this, several approaches have been investigated in this thesis including metal insulator semiconductor HEMTs (MIS-HEMTs), `gate overlapping' HEMTs, where the gate partially overlaps the source and drain contacts and finally a device employing a Schottky source and a Schottky drain contact. The results given show that a MIS-HEMT can have a substantially larger breakdown voltage compared to a Schottky gate HEMT which is clarified through qualitative simulated electric field work and experimental work. Further, the MIS-HEMT shows a high breakdown field of about 87 V/um when a Schottky drain contact is incorporated. The gate overlapping HEMTs attempts to mitigate completely the large electric field found at the drain edge of the gate. Simulated and experimental results are given for this device concept and reveal that the large electric field peak is indeed removed, however, low breakdown voltages are still incurred due to the closeness of the gate edge to the drain contact. Finally, results are given for a device employing Schottky source and Schottky drain contacts and reveals that present theory may not completely describe the operation of this device.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Macfarlane, Douglas James

Subjects

dc:subject × 1

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Macfarlane, Douglas James. Design and fabrication of AlGaN/GaN HEMTs with high breakdown voltages. PhD thesis, University of Glasgow, 2014.