Abstract
dc:description.abstractIntegrated mode-locked laser diodes are effective sources of periodic sequences of optical pulses, which have always been of great interest for a range of spectroscopy, imaging and optical communications applications. However, some disadvantages prevent their widespread use, such as the restricted tuning of their repetition rate and their output power levels never exceeding a few mW. This thesis reports on the work done to address those limitations. Two main findings are presented, the first being the generation of ultra-high repetition rate optical signals through external injection of two continuous wave signals. This mechanism is much simpler than other techniques previously proposed to increase the repetition rate of monolithic modelocked laser, and has proved successful in generating optical signals up to quasi-THz. It is based on injection of two continuous wave signals whose spacing is an integer multiple of the pulsed cavity free spectral range and whose injection wavelengths coincide with two of the monolithic laser modes. This technique allows discrete tunability of the repetition rate with a step equal to the injected cavity free spectral range, and the injected laser has been shown to lock up to a repetition rate of 936 GHz, corresponding to 26 times that of the free-running semiconductor laser (36 GHz). The presented scheme is suitable for integration, opening the way for a successful on-chip generation of ultra-high repetition rate optical signals exploiting coupled cavity phenomena. The second main finding of this thesis regards the changes induced on the pulsed operation of monolithic passively mode-locked lasers by a blue bandgap detuning applied to their saturable absorber. The quantum well intermixing technique has been used for attaining an area-selective bandgap shift on the fabricated chip, being fully postgrowth. The lasers with a detuned absorber were found to have an extended range of gain section currents and absorber voltages in which stable mode-locking operation took place. Furthermore, a comparison of mode-locked devices fabricated on the same chip, respectively with and without a bandgap detuned absorber, showed that the emitted pulses had greater peak power and were less affected by optical chirp when the bandgap of the absorbing section was shifted. A new intermixing technique has also been developed as part of this work to address some inconsistencies of the pre-existing one; the newly introduced approach has been found to provide better spatial resolution and a more precise control of the attained bandgap shift.
Degree
thesis:*- Level dc:type.qualificationlevel
- PhD
- Grantor dc:publisher.institution
- University of Glasgow
- Year dc:date.issued
- 2014
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Pusino, Vincenzo
Subjects
dc:subject × 2Rights
- Language dc:language
- en