Back to search

University of Glasgow

Resilience of some man-made fibres

Abstract

dc:description.abstract

The first part of this research is concerned with the standardisation of a test method to determine the resilience of fibres. The influence of both time and maximum pressure is studied and the loading and unloading cycle is standardised to measure resilience with three maximum pressures (0.01, 0.10 and 1.0 p.s.i.) in the minimum time. The effects of specimen preparation and specimen dimensions (areas and thicknesses) and also the effects of presser foot areas and shapes(plane or hemispherical compressing surface) on measured resilience are investigated. The second part of this work is devoted to investigating those intrinsic fibre properties, which may affect resilience. Six fibre properties, namely, staple length, diameter (denier), crimp characteristics (i.e. percent crimp, uncrimping force, uncrimping energy), inter-fibre friction, tensile elastic recovery and initial modulus are studied. Crimp has the highest influence on resilience whereas fibre friction and diameter indicate comparatively less effect. The staple length shows no significant correlation with resilience and both elastic recovery and initial modulus are also not correlated with resilience. These investigations were carried out on Acrilan, Terylene, and Tricel fibre. The possibility of expressing the thickness-pressure relationship by an equation is considered. The results fit an exponential equation of the form: T = a Pb where 'T' is thickness of the specimen, 'P' is pressure and 'a' and 'b' are constants. The effect of both humidity and temperature on the resilience of fibres is investigated. The resilience decreases as the relative humidity increases. On the other hand there is an increase in resilience with the increase in temperature. Comparison is made between Acrilan, Terylene and Tricel fibres. The influence of surface properties (i.e. amount of finish) of Acrilan studied in relation to the resilience of fibres.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
1965

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Varma, Dharmendra S

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Varma, Dharmendra S. Resilience of some man-made fibres. PhD thesis, University of Glasgow, 1965.