Back to search

University of Glasgow

Gelation and hardening mechanisms in a model polyester resin and related systems

Abstract

dc:description.abstract

Widespread industrial use of unsaturated polyester "contact" resins has led to speculation concerning the mechanism of their hardening reaction, Model compounds for the commercial polyesters were therefore prepared, and their hardening reaction with methyl methacrylate was studied using an original combined viscometer-dilatometer. Investigations into the effect of variations in the amount and type of free radical initiator showed that the gelation of the model system occurred through a conventional addition copolymerisation between the two types of unsaturation present, and also provided confirmation for the proposed kinetic scheme for the pre-gelation reaction mechanism. Preliminary investigations were made into the change in the reaction rate curve in the region of the gel point when passing from a linear to a related polyfunctional (non-linear) polymerisation, and a theoretical explanation is given for the sharpening of the gradual rate increase into a definite kink occurring at the gel point. Infrared examination of the model polyesters prepared from maleic anhydride showed that almost complete isomerisation of the unsaturated linkage from the cis to the trans form took place during the polycondensation reaction. The final stages in the curing of a polyester resin, which are of direct technical interest because of their effect on the high temperature properties of laminating resins, were studied using a ball rebound relaxation technique which produced mechanical "spectra" of the polymer. Second order transition phenomena were shown to give rise to strong absorption peaks, the positions of which were used to follow curing reactions. An "isoelastic rate principle" is proposed for the final decay of the curing rate based on the supposition that curing mechanisms in this phase of the reaction are diffusion controlled relaxation processes. The applicability of the principle to resin systems in general was successfully illustrated by experiments on a base-catalysed epoxide system and an acid-catalysed urea-formaldehyde polycondensation as well as on the vinyl copolymerisation of the model polyester. Observations were made on the relationship between the final state of cure reached in the model polyester system and its original composition. Incidental measurements involved in the evaluation of the ball rebound relaxation technique led to the detection of unusual characteristics in the melting behaviour of linear polyethylenes and isotactic polypropylenes.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
1957

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Grieveson, Brian M

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Grieveson, Brian M. Gelation and hardening mechanisms in a model polyester resin and related systems. PhD thesis, University of Glasgow, 1957.