Back to search

University of Glasgow

Materials fundamental study of the properties and deformation of titanium alloys at room temperature

Abstract

dc:description.abstract

The titanium alloy, Ti-6Al-4V is investigated to increase the current understanding of deformation in this significant alloy at a variety of length-scales. The strain rate sensitivity of titanium alloys is generally consid- ered negligible, however, parallels observed in the rate dependant behaviour have led to a renewed interest in the room temperature deformation. The results of a strain rate jump (SRJ) have been examined using combined high energy x-ray diffraction and microscopy techniques. This deformation is compared to that of constant strain rates where the SRJ is observed to cause texture strengthening and good alignment post jump with the higher constant strain rate for billet Ti-6Al-4V. Microstructural changes have been tracked during deformation via in situ high energy x-ray diffraction in the form of lattice strain evolution. Rolled plate Ti-6Al-4V products (UDR and CR) have been compared with the cross rolled material exhibit- ing the highest strength in the direction of loading. Crystallographic texture has been examined using EBSD analysis. Lattice strain evolution is captured, again using synchrotron high energy XRD. Good macroscopic alignment is observed in the stress-strain response between SRJ and constant strain rate conditions where the timing of the jump does not appear to influence this phenomenon. The strain rate sensitivity can- not be adequately captured macroscopically by a single parameter as lattice strain evolution is dependant on crystallography. An effective moduli dependant on material texture is suggested for Ti-6Al-4V product forms.Computational, CPFE modelling has been performed on various instantiated microstructures to enable the prediction of lattice strain evolution for each of the product forms analysed. The impact of macrozones and texture elements is observed to influence this evolution. The β phase in Ti-6Al-4V is often neglected in analysis due to its low volume fraction, the in situ examination of both Ti-6Al-4V and Ti-6.5Al, an alloy designed to replicate the α phase, question the validity of this sim- plification where the omission of the β phase is observed to dampen the strain hardening response compared to Ti-6Al-4V. α-phase Ti-Al alloys of varying aluminium contents have also been examined showing differing hardening responses, strain rate sensitivity and increasing strength with increased aluminium content.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nelson, Kayleigh

Subjects

dc:subject × 1

Rights

Language dc:language
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Nelson, Kayleigh. Materials fundamental study of the properties and deformation of titanium alloys at room temperature. PhD thesis, University of Glasgow, 2020. https://doi.org/10.5525/gla.thesis.75180