Back to search

University of Glasgow

Digital Signal Processing Audiometer

Abstract

dc:description.abstract

A prototype, air conduction, screening audiometer has been developed utilising a 16-bit fixed point digital signal processor. Circuit functions such as sine wave generation, envelope shaping and attenuation are performed in the digital domain. The analog signal, generated by a sixteen- bit digital to analog converter, is passed through a filter and amplifier stage before being connected to the right or left earphone via electronic relays. The instrument is capable of operating in three basic modes. The manual mode allows test tone parameters to be controlled by simple push buttons with an LED display indicating the instrument settings. The automatic mode carries out a Hughson-Westlake type of test under the control of the patient with the test results available as a tabulated printout. The third mode allows remote control of the instrument via an RS232 interface. No manual setting up of circuitry is required and calibration is enabled by a single switch. Calibration offsets and various programmable parameters of the audiometer are stored in a non-volatile memory. Comprehensive measurements were carried out on the prototype audiometer by a specialist audiometer calibration laboratory.

Degree

thesis:*
Level dc:type.qualificationlevel
MSc(R)
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
1998

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Canning, David M

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Canning, David M. Digital Signal Processing Audiometer. MSc(R) thesis, University of Glasgow, 1998.