Back to search

University of Glasgow

Fabrication and Evaluation of Deep Surface Grating DFB Stripe Lasers Using Quantum Well Material

Abstract

dc:description.abstract

This thesis describes experiments performed to fabricate and evaluate deep surface grating distributed feedback (DFB) lasers using double quantum well material. The distributed feedback structure was created by deep, dry etched, gratings alongside the ridge in the top confining layer of the laser. The material system used consisted of two 0.01 mum GaAs quantum wells and 0.01 mum Al0.2Ga0.8As barriers. The typical emission wavelength of the lasers was about 860 nm. Conditions were optimised to produce a third order 1:1 mark-space ratio grating using holographic exposure, shadow evaporation and reactive ion etching. The typical threshold current of the 2.5 mum stripe DFB lasers was 20% lower compared with the laser fabricated without etching of the GaAs contact layer in pulsed operation and was 37 mA in CW operation. The typical external differential quantum efficiency per facet was 15% in CW operation. The temperature range for single transvere DFB mode operation was found to be from 10 to 75

Degree

thesis:*
Level dc:type.qualificationlevel
MSc(R)
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
1994

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Abe, Hiroaki

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Abe, Hiroaki. Fabrication and Evaluation of Deep Surface Grating DFB Stripe Lasers Using Quantum Well Material. MSc(R) thesis, University of Glasgow, 1994.