Back to search

University of Glasgow

Holography Application to a Grating X-Ray Mask

Abstract

dc:description.abstract

This thesis reports the development of the holographic process towards the fabrication of a grating X-ray mask. A general study is proposed which determines the design characteristics of a grating X-ray mask: a thin pattern of gold lines on a silicon nitride membrane. Such a mask can be used in contact X-ray lithography systems at the carbon Ka line. The second part of the thesis deals with the theoretical aspects of the recording of holographic gratings in a layer of positive photoresist coating a silicon nitride/silicon substrate. A gaussian treatment of the holographic process is presented and shows that it is possible to dispense with the use of collimating lenses on the optical arrangement without noticeable contrast degradation. A computer simulation of the grating recording process on multilayer substrates has been developed and was used to determine the thickness of silicon nitride for which the photoresist grating presents an undercut line profile, an indispensable feature before metal lift-off can be carried out successfully. Finally the fabrication of gratings of various pitches was undertaken. 0.12 micron and 0.17 micron gratings were printed using the front prism technique with UV and blue light respectively. In some cases moire patterns were recorded and the gratings presented an overall patchy aspect and extended only over very small areas. 0.3 micron gratings were successfully fabricated and showed an undercut line profile as predicted by the computer simulation. A thin layer of gold or gold/palladium was evaporated under high vacuum and the grating pattern subsequently lifted-off by dissolution of the photoresist in acetone. In some cases the lift-off was successful and gold gratings were obtained over large areas, But occasionaly the evaporated metal thickness was too high and a tunnelling effect was observed. The fabrication of silicon nitride membranes was attempted but no reliable technique has yet been found of protecting the metal grating from the various etchants. A discussion on the encountered difficulties is presented, solutions to these problems are suggested and a line of progress for future experiments is proposed.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
1985

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dumas, Remi Henri Marc

Rights

Language dc:language
en

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dumas, Remi Henri Marc. Holography Application to a Grating X-Ray Mask. PhD thesis, University of Glasgow, 1985.