Back to search

University of Glasgow

Characterization of radiation-hard monolithic CMOS sensors

Abstract

dc:description.abstract

The work presented in this thesis consists of the characterisation of monolithic CMOS sensors targeting the requirements of the outer-most layer of the ATLAS Inner Tracker after the High Luminosity upgrade of the Large Hadron Collider. Three detectors are investigated: an investigator chip and two large scale demonstrators (MALTA and mini-MALTA). The investigator chip is designed in the standard TowerJazz 180 nm technology and served as a tool to investigate the geometric parameters that affect the pixel capacitance. The MALTA chip is designed in the modified TowerJazz 180 nm technology and implements a novel asynchronous readout to minimise power consumption. The sensor is irradiated with X-rays up to 1.25 MRad to test the resistance of the front-end circuit to ionising radiation effects. The mini-MALTA chip is designed following the results obtained on MALTA and implements an improved front-end and pixel layout to enhance the radiation hardness of MALTA. A similar X-ray irradiation campaign is done for this chip showing good radiation hardness after 80 MRad of TID. Aside from the characterisation work, FPGA-based readouts for the MALTA and mini-MALTA chips were developed in collaboration with the CMOS development group at CERN.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Argemí, Lluís Simón

Subjects

dc:subject × 2

Rights

Language dc:language
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Argemí, Lluís Simón. Characterization of radiation-hard monolithic CMOS sensors. PhD thesis, University of Glasgow, 2021. https://doi.org/10.5525/gla.thesis.82418