Back to search

University of Glasgow

High-confinement alumina waveguides for nonlinear optics in the visible and ultraviolet

Abstract

dc:description.abstract

There is increasing interest in photonic integrated circuits (PICs) operating in the blue and ultraviolet (UV), driven by applications such as sensing and optical timing. Novel material platforms are required to operate at these wavelengths; amorphous alumina has an exceptionally wide bandgap, and is therefore a promising candidate. High-confinement waveguide geometries allow for high component integration densities and are essential for nonlinear frequency conversion; however, they can be challenging to fabricate and are sensitive to material absorption losses. This work establishes a methodology for fabrication of high-confinement alumina waveguides, then demonstrates that fabricated devices are suitable for low-loss visible waveguiding and integrated nonlinear optics. Challenges in developing a high-confinement alumina platform are twofold. Atomic layer deposition (ALD) is a deposition method which can produce pure and homogenous films with low absorption losses; however, depositing amorphous alumina using a conventional thermal ALD process is extremely slow, placing a practical limit on the maximum attainable film thickness. Using an oxygen plasma as the oxidant considerably reduces deposition time; in this work, I establish that alumina films deposited using a dioxygen plasma-enhanced atomic layer deposition (PEALD) process can be used to produce low-loss optical waveguides. Furthermore, alumina is difficult to etch selectively, especially whilst maintaining the low sidewall roughness required for operation in the UV-visible region. I address this by developing a waveguide definition process using an hydrogen silsesquioxane (HSQ) mask exposed using electron beam lithography (EBL) and a BCl3 etch plasma, which allows etching of waveguides up to 800nm thick. Using this process, I fabricate 400nm-thick amorphous alumina waveguides with confinement factors over 0.9 at a wavelength of 450nm. With propagation losses of 0.8dB/cm, these are the lowest-loss high-confinement waveguides reported for blue light. I present dispersion engineering calculations which demonstrate the necessity of high-confinement, unclad waveguides for stimulation of spectral broadening through nonlinear optical processes, and demonstrate the first supercontinuum generated in alumina waveguides, extending from 384nm to 951nm at a level of −50dB, in 700nm-thick waveguides. These results establish the viability of amorphous alumina deposited using dioxygen PEALD as a wide-bandgap material platform for UV-visible linear and nonlinear optics.

Degree

thesis:*
Level dc:type.qualificationlevel
PhD
Grantor dc:publisher.institution
University of Glasgow
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • McKay, Elissa Grace

Subjects

dc:subject × 2

Rights

Language dc:language
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Glasgow
Base URL
theses.gla.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

McKay, Elissa Grace. High-confinement alumina waveguides for nonlinear optics in the visible and ultraviolet. PhD thesis, University of Glasgow, 2024. https://doi.org/10.5525/gla.thesis.84493