Back to search

National Technical University of Athens (NTUA)

Προσομοίωση μηχανικής συμπεριφοράς υαλωδών πολυμερών και συνθέτων υλικών: ιξωδοπλαστική προσέγγιση και ανάλυση με πεπερασμένα στοιχεία

Abstract

dc:description

In general, all the solid polymer materials exhibit an interesting peculiarity (transition in real words): they could reveal any kind of behaviour like that of a glassy solid, an elastomer or a viscous liquid depended of the temperature, the time scale of testing and the history of the specimen. Or, in a more astonished manner, all these responses could coexist in a more complex behavior as a result of specific excitation conditions. The description of every state demand generally different approximation and mathematical formulation all of which we'll see extensively. Although these approximations could with appropriate modifications and admissions lead to the forecasting of the behavior of composite materials too, the use of finite elements analysis becomes indispensable cause the enhance complication of the developing stress and strain fields. All these are presented briefly in chapters 1 and 2. In chapter 3 the elastomer state is analysed and the two most important approximations are presented which lead in a Gaussian the first and in a non-Gaussian distribution the second. The corresponding constitutive equations in three dimensions are quoted. The viscoelastic behaviour of polymers is described and analytically presented in chapter 4. The Boltzmann Superposition Principle and the use of a general differential equation are two alternative ways to connect the stress and strains in linear viscoelasticity. In the second case, entirely equivalent^, the description of viscoelastic behaviour could result from the use of models constructed from elastic springs and viscous dashpots. From a different point of view, the non-linear viscoelasticity, which the polymers frequently exhibit, faced with the use of approximation theories in molecular, Theological or/and empirical base, like: the Schapery approximation, the stress-clock function of Bernstein-Shokooh, the Kohlraush-Williams-Watts equation and the viscous theory of Eyring. The temperature, the strain rate, the pressure and also a rank of other parameters influence considerably the general polymer mechanical behaviour and so their plastic response. But, although the polymers couldn't regarded as perfect plastic materials, their yielding behaviour could in a first approximation studied through perfect plasticity theories, be enough these parameters to deserved constant and to choice conditions so as not to take place adiabatic heating. From extensively ranks of experiments was confirmed that von Mises modified criterion has huge application in the case of polymers. Many times also the non-linear viscoelasticity used for the modelling of yield process in polymers eg through the use of the Schapery relation and the KWW equation for the representation of a wide relaxation time distribution. Respectively the Eyring viscous theory could be enhanced so as to described and the yield process, but its obscuring parameters and the absence of strain softening terms are some of its disadvantage. Argon suggest that the yielding correspond to the elastic interactions overcoming of one molecular chain and its neighbourhood. So, the resistance to plastic deformation at the yield point arise essentially from the interactions between the molecules. The appearing inhomogeneity during the yielding is another one feature of glassy polymers. The inhomogeneity nature of shear strains during the yielding with the appearance of shear zones led Bowden and Raha in the development of a thermally activated rate process for the yield in polymeric glasses using the basic principles of dislocations. From a different point of view G'Sell and Jonas used the known expression of Orowan to attain an exact representation of true stress-strain curves and also all the accompanied features, like: strain softening, transition phenomena, physical aging, softening after cyclic loading etc (chapter 5). More specific, at the present work were investigated three different approximations for the determination of the total three dimensional mechanical response of glassy polymers. At first the Boyce, Parks and Argon model was presented (that essentially is an evolution of Haward-Thackray model). It consists from three components: one linear elastic spring in series with a viscous dashpot and a non-linear elastic hardening spring. With the two last components act in parallel. Adopting the elastoplastic analysis of Lee and the simplification admission of Fardshisheh and Onat, that all the spin processes be added in the plastic deformation, the analysis facilitated remarkably. In the BPA model the Argon expression is modified so as include the dependence of pressure, the physical aging and the description of strain softening. At last, the entropie resistance, from the gradually orientation of molecular chains, is approximated with the use of non-Gaussian statistical mechanics of Wang and Guth. G'Sell and Jonas in a different manner tried to modelling the behaviour of flow based in the dynamic of plastic waves and co-estimate the observation that the stress flow is increasing function of strain and its rate too. In contrast with the BPA model, for the description of true yield drop and all the transitions features, they assumed the existence of localized molecular discontinuities (plastic waves) of linear character, that could initiate and motivate with the action of an effective stress. So, the rate of plastic strains could be expressed within the form of Orowan, according to: the rate of plastic strains isproportional of plastic wave density. Finally, in Rubin analysis an appropriate vector triad is introduced, through of which could characterized the dilatation, distortion and orientation of average atomic lattice in present configuration, in relation with the reference configuration of lattice. This kinematics assure the possibility of solving the problem knowing only the first and the last configurations and so there is no need for knowing the full path of body (chap. 6). The reference material was an epoxide resin with relatively low glass transition temperature. Uniaxial tension and compression tests were conducted in a broad strain rates. This certain material, under the conditions that was tested, exhibited characteristic yield peak be followed from strain softening whereas at the last state revealed hardening (for the case of compression loading). So, for the dependence of yield stress with the strain rate we accepted the relations of Argon and Eyring. And the state of hardening was approached mainly using the three chain model of James and Guth. For the initial viscoelastic part appropriate models were applied and examined, like the Maxwell model, the standard solid (three parametric), four parametric models and also non-linear viscoelastic models. In the BPA approach the load drop approximated through the changing of athermal shear resistance that we accept a progressive decreas versus appearing plastic strains. Finally, the dependence of yield stress from hydrostatic pressure obtained through the dependence of athermal shear resistance from pressure. In G'Sell and Jonas model, was considered that the density of plastic sites don't remain constant but increase versus stress, linear in a first approximation. In the present work we used the approximation of Gilman and Johnston of continuous increasing of density. Correspondingly in Rubin analysis we considered at first the rate of plastic rotations zero and we follow the same approximations as the BPA model. The application of these theories in the examined polymers gave interesting results not only for the certain material but also for the models. In the next two chapters of present dissertation made the analysis, elastic and elastoplastic, of composite materials. In chapter 8 we performed the elastic analysis. The results that were obtained from finite element analysis they used as reference values for the analysis and comments of the most applicable models for the estimation of Young modulus Ec of composite materials. So, the limits of the characteristic properties of the composite (volume ratio, elasticity modulus, Poisson ratios) and the relation factors for which all these are validated were defined. Estimating the diversions from the reference state could be possible to define qualitatively the total behavior of a composite and to answer for a rank of material features like the interaction of dispersed phase, the imperfections, the aggregations, the bonding degree, the existence of mesophase etc. Next, we gave an alternative relation that essentially became from the remarks had appeared including all the critical features. At the end we carried out a comparing of the finite elements findings with the experimental results obtained from this, in laboratory prepared,composite material. The determination of the appearing diversions gave interestinginformation for the behavior of these composites. At last, in chapter 9 we expand in composites the already from the chap. 7 used procedures for the modelling of pure polymeric materials. But firstly, were made suitable modifications, additions and enhancements, in the basis of succession observations. For this purpose were performed uniaxial tension and compression tests on the prepared in laboratory composites materials. The analysis of stress and strain fields was obtained with the tool of finite elements. The yield features of composite materials were determined and we tried their analytic description. Reversibly, in the base of derived information from the analysis of composites and expanding of conclusions, we derived original components for the following conditions, mechanism and the evolution of yield in the pure polymer materials.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2002

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Πανδερμαράκης, Ζαχαρίας
  • Pandermarakis, Zacharias

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/13442

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Πανδερμαράκης, Ζαχαρίας; Pandermarakis, Zacharias. Προσομοίωση μηχανικής συμπεριφοράς υαλωδών πολυμερών και συνθέτων υλικών: ιξωδοπλαστική προσέγγιση και ανάλυση με πεπερασμένα στοιχεία. National Technical University of Athens (NTUA), 2002. http://hdl.handle.net/10442/hedi/13442